Audited Supplier
Laboratory Water Deionizer Reverse Osmosis Deionized Water Machine with Pressure Tank
Using advanced reverse osmosis technology and ultra-purification column with original formula filler, Okay energy ultra-pure water and reverse osmosis RO pure water machine provides the overall solution of laboratory water. This series of machine use tap water as water. At the same time, the preparation of 18.2 MOhm-cm ultrapure water and RO pure water, ultrapure water reach or exceed the quality standards of China laboratory water and test methods(GB6682-2008)and ASTM, CLSI, ISO3696 level of water quality standards. This system is compact and easy to operate.
Technical Parameter
Model | OK-EP10 | OK-EP20 | OK-EP40 | OK-EP60 |
Output | 10L/h | 20L/h | 40L/h | 60L/h |
Feed water requirements | Tap water,temperature 10~35ºC,pressure0.15-0.35Mpa ; TDS:≤200mg/L | |||
RO water quality |
| |||
Conductivity(25ºC) | 2-10μs/cm | |||
Iron rejection rate | 99%(new RO membrane) | |||
Organic rejection rate | >99%,when MW>200Balton | |||
Paeticles and bacteria rejection rate | >99% | |||
Ultrapure water quality |
| |||
Resistivity(25ºC) | 18.2MOhm-cm | |||
Total organic carbon TOC** | 1-3ppb | |||
Particles(>0.2μm) | No particles larger than 0.22μm
| |||
Bateria | <1CFU/ml | |||
Particle | >0.22um/ml<1um/ml | |||
AC requirement | 110/220V,50/60Hz | |||
Dimension(L*W*H-mm) | 410*300*500mm / 500*400*750mm | |||
Weight(kgs) | 20kgs,30kgs,50kgs,70kgs | |||
Standard configuration | Main body,pressure tank | |||
*The conductivity of RO water is affected by the inlet conductivity of tap water, and the typical value is calculated with inlet water less than 300 μS.
**The TOC value of water production is directly affected by inlet conditions and sampling operating environment.
