Audited Supplier
Principle of Lamella ClarifierThe Lamella Settler water treatment plant is designed to remove particles from liquids. Its theory is put forwardon the basis of Shallow tank, which tells the settlingefficiency of sedimentation tank is only related tosurface area. On LST the settling area is the total area ofthe inclined plates projected on a horizontal surface.Thisreduces the footprint of lamella settlers by about 90% as compared to conventional clarifiers and the efficiency.
Features
1.Maximized sedimentation area within limited footprint.2. High-rate clarifier for high SS water (grit, clay, lime & mental particals).
3. Circular sludge hopper with sludge scraper to reduce total transportation height.
4. Indoor or outdoor layout (environmental temperature should be over 0°C).
5. Apply to automatic & continious operation.
6. Design life: Carbon steel material: >10years; Stainless steel material: >20years.
Model And Specification
| Model | Capacity | Dimension(m) | Nozzle List(DN) | |||||
| (m3/h) | L | W | H1/H2 | Inlet | Outlet | Sludge Outlet | Backwash | |
| DSC-001 | 1 | 1.6 | 0.8 | 2.0/2.0 | 25 | 25 | 50 | 50 |
| DSC-003 | 3 | 1.6 | 1.1 | 2.0/2.0 | 50 | 50 | 50 | 50 |
| DSC-005 | 5 | 2.6 | 1.6 | 2.9/2.9 | 80 | 50 | 50 | 50 |
| DSC-010 | 10 | 3.4 | 1.8 | 3.6/1.8 | 100 | 80 | 50 | 50 |
| DSC-020 | 20 | 3.4 | 2.2 | 3.6/1.8 | 150 | 100 | 50 | 50 |
| DSC-030 | 30 | 4.2 | 2.2 | 4.0/2.2 | 150 | 150 | 50 | 50 |
| DSC-040 | 40 | 5.3 | 2.2 | 3.6/1.8 | 200 | 150 | 50*2 | 50 |
| DSC-050 | 50 | 6.3 | 2.2 | 3.8/2.0 | 200 | 200 | 50*2 | 50 |
| DSC-060 | 60 | 7.2 | 2.2 | 4.0/2.2 | 250 | 200 | 50*2 | 50 |
| DSC-070 | 70 | 7.2 | 2.6 | 4.0/2.2 | 250 | 200 | 50*2 | 50 |
| DSC-080 | 80 | 7.2 | 2.7 | 4.0/2.2 | 250 | 200 | 80*2 | 50 |
| DSC-090 | 90 | 6.7 | 3.1 | 4.0/2.2 | 250 | 250 | 80*2 | 50 |
| DSC-100 | 100 | 7.2 | 3.1 | 4.0/2.2 | 250 | 250 | 80*2 | 50 |
| DSC-120 | 120 | 8.3 | 3.3 | 4.0/2.2 | 250 | 250 | 80*2 | 50 |
| DSC-150 | 150 | 9.8 | 3.3 | 4.0/2.2 | 250 | 250 | 80*2 | 50 |
2. Excellent hydraulic conditions: no hydraulic corner and vortex, better precipitation performance.
3. Inclined plates Chokeless : plates are of anale 60 degrees, spacing between 80 100 mm.back-washing device used.
4. Strong and durable: Inclined plates are breakless, collapseless.Adopt 6mm hard PVC board or 8mm high quality PP board as special separation plate, module embedded installation, highstrength, easy disassembling and maintenance.
5. Sludge discharge smoothly : no dead angle, sludge pump is recommended.
Applied Industry
Suitable for all applications where sedimentation is the preferred technology,like:
1.Electronic & electroplating wastewater;
2.Paper & pulp wastewater;
3.Industrial process water;
4.Treatment before filtration;
5.Filtrate and backwash water;
6.River water clarification;
7.Sludge thickening, etc...
Our Services
1. Detailed installation manual and maintenance quideline are provided with the equipment.
2. Technical training and site-commissioning are available for you.
3. Any equipment issue, we will stand by. However, the visa fee, air tickets, accommodation.wages will be paid by buyers.
FAQ:
Q:How to buy your idea products?
A:You can provide us your sewage sources,sewage quality ( COD, BOD, SS) , flow rate and ground area (connect us for more details).
Q:How to pay?
A:TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
Q:What is the delivery time?
A:It depends on order quantities. Generally speaking, the delivery time will be within 4 to 6 weeks.
Q:How to pack the products?
A:We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
Q:How to keep your equipments from corrosion?
A:We use the world-famous paint, like epoxy-coal tar pitch etc. What's more, we paint strictly according to the standard process.
Q:How to install after the equipments arriving destination?
A:We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you.
