Audited Supplier
PHYM-W/L-4/8/16/32/64/80/100-10~150
Carbon Steel or Stainless Steel
0.6~1.2MPa
Red or Others
1000~50000liters
4/8/16/24/32/64/80/100
1%, 6% or 3%
50/65/100/150/200/250
Horizontal or Vertical
Foam Extinguish System
Yingsui
Wooden Packing
GB4986
China
8424
Product Description
Foam baldder tanks can be formed to high, medium and low expansion foam extinguishing system with high and medium and low expansion foam generator, air foam spray gun and so on. The system is widely used in foam fire extinguishing system, such as chemical industrial enterprises, port and dock, large oil storage, airport oil storage, oil or fuel power plants, boiler room, dangerous goods storage, chemical warehouses and so on.
Foam bladder tanks is made from tank, bladder, pressure-type proportioner, safety valves, control valves, level gauge and a lot of ancillary components. Pressed water is divided into two parts according to a certain ratio(1: 99 or 3: 97 or 6: 94), 99%(97% or 94%) of the pressed water flow to the Proportioner, and 1%(3% or 6%) of the pressed water flow to the interlayer between tank and bladder, the water in interlayer will push foam concentrate in bladder into Proportioner. Foam concentrate will be injected into pressed water that flows through the proportioner and form foam solution, then the foam solution will flow to foam producing equipment, such as foam chamber and so on. Finally, air-foam concentrate is applied to put out fire.
The foam concentrate in the bladder can be used next time because it doesn't contact with water.
Type of Proportioner: 1%, 3%, 6%.
Company Profile
Successful Cases
Trade Capacity
International Commercial Terms(Incoterms):EXW,FOB, CIF, CFR
Terms of Payment: L/C, T/T
Average Lead Time:
Peak Season Lead Time: one month,
Off Season Lead Time: within 15 workdays
Number of Foreign Trading Staff: 4
Export Percentage: 30%
Main Markets: Southeast Asia
Production Capacity
Factory Address:Jubao Industrial Zone, Qingyuan, Guangdong, China
R&D Capacity:Own Brand, ODM, OEM
No. of R&D Staff: 15
No. of Production Lines:6
Annual Output Value:US$10 -20m
FAQ
Q:Are you a factory or trading company?
A:We are a professional manufacturer. We warmly welcome clients from worldwide to visit our factory and cooperate with us. We can offer OEM & ODM service.
Q:Can you produce goods with special specification?
A:Our company focuses on customized products. First of all, we need to know the specification in details, and then we need to check with our technology department. We will give customers satisfying reply as soon as possible.
Q:How long is the delivery time?
A:45-60 days after the advance payment.
Q:What's your advantage?
A: Independent R&D team, professional production and sales team, great production capacity sustainable supply. Use the best material and production process. Low defective rate.
Q:How can we guarantee quality?
A:Always a pre-production sample before mass production; Always final Inspection before shipment.
Q:Could you supply the samples?
A:Free samples always ready if the value is within our purview.
Q:Can you add some logo on the products?
A:Yes. We could OEM and design your logo.
Q:Are you able to design or explore a new products for us?
A:Yes, we are able to, if the clients could supply the drawings or samples.
Q:How about delivery ?
A:We can send to you by sea/air/express according to you, usually deliver within 7-10 working days after receive deposit.
Foam bladder tanks is made from tank, bladder, pressure-type proportioner, safety valves, control valves, level gauge and a lot of ancillary components. Pressed water is divided into two parts according to a certain ratio(1: 99 or 3: 97 or 6: 94), 99%(97% or 94%) of the pressed water flow to the Proportioner, and 1%(3% or 6%) of the pressed water flow to the interlayer between tank and bladder, the water in interlayer will push foam concentrate in bladder into Proportioner. Foam concentrate will be injected into pressed water that flows through the proportioner and form foam solution, then the foam solution will flow to foam producing equipment, such as foam chamber and so on. Finally, air-foam concentrate is applied to put out fire.
The foam concentrate in the bladder can be used next time because it doesn't contact with water.
Type of Proportioner: 1%, 3%, 6%.
| Model | PHYM32 | PHYM48 | PHYM32×2 | PHYM48×2 |
| Working Pressure | 0.6MPa-1.2MPa | |||
| Flow Range of Solution | 4-32L/s | 12-48L/s | 4-64L/s | 12-96L/s |
| Mixing Ratio | 3%-3.9% or 6%-7% 3%-3.9% or 6%-7% | |||
| Pressure Difference of Inlet and Outlet | ≤0.1MPa horizontal type - ≥0.1MPa vertical type | |||
| Tank Capacity | 600L 1000L 2000L 3000L 5500L 7600L 10000L | 600L 1000L 2000L 3000L 5500L 7600L 10000L | 2000L 3000L 5500L 7600L 10000L | 2000L 3000L 5500L 7600L 10000L |
Company Profile
Successful Cases
Trade Capacity
International Commercial Terms(Incoterms):EXW,FOB, CIF, CFR
Terms of Payment: L/C, T/T
Average Lead Time:
Peak Season Lead Time: one month,
Off Season Lead Time: within 15 workdays
Number of Foreign Trading Staff: 4
Export Percentage: 30%
Main Markets: Southeast Asia
Production Capacity
Factory Address:Jubao Industrial Zone, Qingyuan, Guangdong, China
R&D Capacity:Own Brand, ODM, OEM
No. of R&D Staff: 15
No. of Production Lines:6
Annual Output Value:US$10 -20m
FAQ
Q:Are you a factory or trading company?
A:We are a professional manufacturer. We warmly welcome clients from worldwide to visit our factory and cooperate with us. We can offer OEM & ODM service.
Q:Can you produce goods with special specification?
A:Our company focuses on customized products. First of all, we need to know the specification in details, and then we need to check with our technology department. We will give customers satisfying reply as soon as possible.
Q:How long is the delivery time?
A:45-60 days after the advance payment.
Q:What's your advantage?
A: Independent R&D team, professional production and sales team, great production capacity sustainable supply. Use the best material and production process. Low defective rate.
Q:How can we guarantee quality?
A:Always a pre-production sample before mass production; Always final Inspection before shipment.
Q:Could you supply the samples?
A:Free samples always ready if the value is within our purview.
Q:Can you add some logo on the products?
A:Yes. We could OEM and design your logo.
Q:Are you able to design or explore a new products for us?
A:Yes, we are able to, if the clients could supply the drawings or samples.
Q:How about delivery ?
A:We can send to you by sea/air/express according to you, usually deliver within 7-10 working days after receive deposit.
