Audited Supplier
The ore dryer is suitable for drying slag, carbide slag, limestone, clay, river sand, iron ore, quartz sand, ore powder, ore concentrates, etc. which can be widely used in cement, mining, building materials, chemicals, metallurgy, chemical, slag, clay, and other industries. The equipment can be customized according to the type of material, depth of precipitation and user needs to meet the individual needs of each user.
Zhengzhou DINGLI New Energy Technology Co., Ltd. is currently the most professional and most authoritative enterprise engaged in the research and development of drying equipment in China. It is the only science and technology enterprise in China's drying industry that integrates design, production, and sales. After nearly 20 years Fast and steady development has gradually become the leader of the Chinese drying equipment industry. The dryer for slag, slag, and other materials has been meticulously researched and developed after more than 20 years of drying practice and researches, it has been continuously improved. With its advanced technology, high efficiency, low energy consumption, stable operation, and easy operation and maintenance, safety and environmental protection, praised by users, more than 100 sets of drying equipment are perfectly operating in China and around the world.
The ore dryer is mainly composed of hot air furnace, belt conveyor, rotary drum dryer, belt conveyor, induced draught fan, cyclone dust collector, bag dust collector (or wet dust collector) and operation control system. The equipment adopts the fair current (or countercurrent) drying process.
After entering the drying drum, the wet materials are spitting into the following working areas: First, the material guiding zone. The mineral slag enters this zone and contacts with high-temperature hot air to quickly evaporate water. Under the circumstance of the large lead angle guide plate, it is transferred to the next work area; the second is the copy board area. The mineral slag is the lifting flight drop and picks up in this area to form the material curtain state. At this time, the material in full contact with the hot blast. The moisture in the material slag is quickly evaporated and stripped into water vapor. The water vapor drawn away immediately by the induced draft fan to achieve the purpose of drying the mineral slag; the mineral slag is dried in this area to moisture content of less than 5% (or lower) In the loose state, after the heat exchange, the material reaches the required moisture state and enters the final discharge area. The third is the discharge area. The drum does not have a copy board in this area. The material is rolling in the area to the discharge port, completing the entire drying process.
1. The dryer is made of alloy steel plate manufacturing,the wear-resisting 3-4 times of ordinary steel , the service life of the equipment is more than 10 years.
2. Material initial moisture content 15%, final moisture to ensure below 0.5-1%,which is the preferred products of the cement plant, GGBS and dry mortar production line.
3. The dryer thermal efficiency is as high as 80%, at the same time, the total power is low, 40% energy saving.
4. The fuel can be adapted to the coal, oil, gas,it can be dried under 20-40mm particles material, aggregate, powder material.
5. The dryer covers an area of about 40% lower than single drum dryer and civil investment reduced by about 50%.
6. No air leakage phenomenon, solved the sealing difficulties, modular units, installation is convenient. 7. The discharge temperature is < 50 ,which can be directly feed libraries, without cooling.
| Model | Capacity(T/D) | Initial moisture(%) | Final moisture(%) | Total Power(kw) | Covering area(m²) |
| DLMG1916 | 300 | 20-30% | <5% | 130 | 42*16 |
| DLMG2220 | 500 | 150 | 46*16 | ||
| DLMG2522 | 800 | 200 | 48*16 | ||
| DLMG2825 | 1000 | 250 | 51*16 | ||
| DLMG3026 | 1300 | 280 | 52*18 | ||
| DLMG3228 | 1500 | 330 | 55*18 | ||
| DLMG3430 | 1800 | 380 | 56*18 | ||
| DLMG3632 | 2200 | 450 | 58*18 | ||
| DLMG3835 | 2700 | 560 | 60*18 | ||
| DLMG4036 | 3000 | 660 | 60*18 |
Below is Dingli Group Packaging & Shipping:
Your device will be packed well in container and suit for long ocean shipping.
Below are Dingli Dryer Factory & Sales Team & Production Workshop Pictures:
Below are Dingli Customers Visiting:
Dingli Dryer Production Line has exported to over 80 countries with 300 foreign partners, such as Germany, Britain, United States, Italy, Israel, Chile, Thailand, Russia, Vietnam, India, Cambodia, Indonesia, Malaysia, Thailand etc.
