Audited Supplier
Overview
Laser cleaning Machines is a new generation of surface cleaning high-tech equipments. An environmental friendly laser ablation method to replace chemical and mechanical cleaning methods,which is easy of installation, manipulation and automation. It can remove the surface of the rust, resin, oil, stains, dirt, coating, paint,etc. Laser cleaning is considered to be the most reliable and effective solution because of its non-abrasive, non-contact, non-thermal effect and applicability to various materials.
Laser cleaning will be instead of traditional chemical and mechanical cleaning methods for environmental protection and safety.
The SMART HC Series Handheld Laser Cleaning Machine produced by HG STAR is a new generation of high-tech surface treatment products, which are easy to install, operate and can be automated. It is simple to operate. Turn on the power, let the equipment on, and the cleaning can be carried out without chemical reagents, medium, dust, and water. It can be fitted to the curved surface, with good cleaning effect. It can remove resin, paint, oil stains, stains, dirt, rust, coating, plating and oxide layer on the surface of objects, and it is widely used in the industry, covering ships, auto repair, rubber molds, high-end machine tools, rails, and environmental protection.
Hand-held laser cleaning machine, mainly uses laser to burn off metal surfaces, such as rust, paint, etc., and uses metal reflective properties at the same time. Make sure the part itself is not damaged.
As long as you take this laser cleaner and sweep over the rusted part, the rust will disappear completely. The principle of this laser cleaning machine is that when the rust is subjected to high temperature, it will evaporate instantly, and after the plasma is separated, due to the high reflectivity of the underlying metal to light, the rust removal part will not be damaged even when exposed to the laser. Therefore, This laser cleaning method is effective and safe, and even perfectly cleans the corners of parts such as letters and bolts. Therefore, it can be easily dealt with whether or not it is difficult to remove rust. Rust has nowhere to hide as long as light can reach it.
>>>Non-contact cleaning, no damage to the substrate.
>>>Precise cleaning, can achieve selective cleaning of precise position and size.
>>>No chemical cleaning fluid, no consumables, safe and environmentally friendly.
>>>Simple operation, can be hand-held or fitted with manipulator to realize automatic cleaning.
>>>The ergonomic design greatly reduces the labor intensity of operation.
>>>High cleaning efficiency and save time.
>>>The laser cleaning system is stable and requires almost no maintenance.
>>>Optional mobile battery module.
| Operating environment | |
| Parameter content | SMART HC-1000 |
| Voltage | 220V/380V, alternating current at 50/60Hz |
| power consumption | lower than 8000W( including water cooler) |
| Working temperature | 5ºC~40ºC |
| Working humidity | ≤80% |
| Optical parameters | |
| Average laser power | ≥1000W |
| Power stability | better than 5% |
| Power adjustment range (%) | 10-100(gradient adjustable) |
| Repetition frequency (kHz) | 20-200(gradient adjustable) |
| Fiber length | 5-10m |
| cooling method | water-cooled |
| Cleaning head parameters | |
| Scanning range (length * width) | 5mm~120mm,Continuously adjustable; |
| scanning frequency | not less than 300Hz |
| Focal length of field lens (mm) | 160mm(Optional 160mm~500mm) |
| Depth of focus | max. 10mm |
| Mechanical parameter | |
| Overall size (length, width and height) | about 1055mm×620mm×1090mm |
| Total Weight | about 190Kg |
| cleaning head weight (including isolator) | about 1.9Kg |
| Operation method | hand-held/automated |
2. The artificial damage in the warranty period and damage after warranty period, Seller offers paid service.
3. The Seller will give 24 hours service support during warranty time, and giving technical guide by email, telephone, Fax for daily maintenance, if need local support, Buyer has to pay for the travel and
accommodation & meal cost for the people from seller's side, no labor charge require. If products are out of warranty and require on site service, Buyer have to pay for the travel and accommodation & meal cost for the people from seller's side, labor charge is require, USD200/day per people.
4. About the transportation expanses of spare parts will be supported by both parties in the warranty period, like Buyer support the cost of transportation for damage spare part back to supplier; Seller support the new spare part deliver to Buyer.
About Us
Company certification
Q: What's the package?
A: We have 3 layers package. For the outside, we adopt wood craft case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by thickening plastic bag for waterproof.
Q: Will the package damaged during transportation?
A: Our package is considerate all the damage factors and make it to be safe, and our shipping agent have full experienced in safe transportation. We have exported to 180 countries worldwide. So please don't worry, you will receive the parcel in good condition.
Q: How to install and run the machine?
A: Our technician have installed the machine before shipping. For some small parts installation, we will send detail training video, user's manual along with the machine. 95% customers can learn by themselves.
Q: How can I do if the machine goes wrong?
A: If confronted with such problems, please contact us asap and do not try fix the machine by yourself or someone else. We will response within 24 hours as quick as we can to solve it for you.
Please advise us the following information, then we can recommend you the most suitable model, right now, don't hesitate to contact -China HG STAR!
