Audited Supplier
Lift range: ~150m
Design pressure: 1.6MPa Application temperature: ~500ºC
Application field: This series of pump is mainly used in sulphuric acid, pyrite acid sulfur recovery, coal chemical industry, petroleum cracking of sulfur recovery and other material need heat preservation conditions.
Summary
Sulfur pump with small flow capacity, high delivery lift, is developed on the strength of previous sulfur acid pump, coll aborated with institutes, colleges, it is characteristic of high delivery lift andsmall flow capacity, impossibly achieved by centrifugal pump, while unstable performance existing during operation of volute pump. There for, adopt latest hy draulic design, integrating unique advantages of centrifugal pump and volute pump. It has filled in domestic gap, reac hed international advanced level, able to substitute for impo ted ones, economizing relevant investment, widely used in acid making procedure to convey liquefied sulfur under 130-158ºC, with improvement, it also can be used under ot her hi - temperature and insulation working conditions.
Parameter range
Capacity:Q:0.2-400m3/h
Head:H:2-150m
Temperature:T:500ºC
Pressure:P:1.6MPa
Under water depth:L:0.5-5m
Meaning of model code
2-Capacity
120-Head
1-Under water depth
LHY-Feiyue Sulfur pump code
| 1 | Before the pump cover | 2 | Impeller nut | 3 | Pump body | 4 | Impeller | 5 | Elbow | 6 | Under the collar |
| 7 | Bushing | 8 | Liquid pipe | 9 | Intermediate to take over | 10 | Pump shaft | 11 | Packing collar | 12 | Stuffing box |
| 13 | Packing gland | 14 | Bearing box | 15 | Bearing cover | 16 | Bearing | 17 | Bearing | 18 | Lock nut |
| 19 | Bearing cover | 20 | Electric frame | 21 | On taking over | 22 | Bushing gland | 23 | On the liner | 24 | Guide bearing |
| 1 | Screen | 2 | Under the collar component 1 | 3 | Entrance section | 4 | Impeller 4 | 5 | Lock nut,bolt(4) | 6 | Guide vane 4 |
| 7 | Pump body | 8 | Balancing drum | 9 | Under the collar component 2 | 10 | Take over(steam pipe) | 11 | Take 2 in the middle(steam pipe) | 12 | Intermediate shat sleeve component(2) |
| 13 | Middle bearing | 14 | Shaft | 15 | Among over 1(steam pipe) | 16 | Coupling collar | 17 | Coupling shaft snap ring | 18 | Intermediate to take over |
| 19 | On the shaft | 20 | Steam over | 21 | On taking over | 22 | Floor | 23 | Bearing box | 24 | Packing gland |
| 25 | On the shaft sleeve 1 | 26 | Collar 2 | 27 | Bearing | 28 | Bearing gland | 29 | Dowel pin coupling | 30 | Electric trame |
| 31 | Motor |
Performance parameters of the table
