Audited Supplier
FL-30, FL-31, FL-34, FL-40, FL-44
EMC, ISO9001:2008, ISO9001:2000, RoHS, CE
1-4A
220V
Thermoplastic
Electric
Diaphragm
Electronic Type
FPM
No Leak
DC Permanent Magnet, Totally Enclosed, Non-Ven
35psi/2.4bar
12.5lpm/3.3gpm
Santoprene
Thermal/Ignition Protection
Intermittent
1/2" NPT
LifeSRC
Cartons
CE
China
Product Description
Product Description
DC Diaphragm Pressure Pump 24V
12.5LPM/3.3GPM 35PSI
1-Year Warranty!
Colors: Black or required
Application
1. Agriculture/Yacht / RV/Caravan pressurized water system
2. Sprayer fixture (Vehicle-mounted sprayer, electric sprayer)
3. Food beverage filling & liquid transfer
4. Any other pressurization system
How a Diaphragm Pump Works
The pump is driven by an AC or DC motor
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragmbehind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: the number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
Motor Voltage | 12/24V DC |
| Type | 4Chamber Diaphragm Pump, self priming, capable of being run dry |
| Mode | Demand |
| Certifications Option | CE Approval |
| Liquid Temperature | 140°F (60°C) Max |
| Priming Capabilities | 6 Feet(1.8m) |
| Max Pressure | 40psi(2.8bar) |
| Max Flow Rate | 17lpm(4.5gpm) |
| Thermal Overload Protected | Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports | 10/13mm pyramid hose barb, 13mm angle hose barb |
| 1/2 NPT thread filter for your choice. | |
| Duty Cycle | Intermittent (under different pressure the continuous working time will also be different) |
| Motor Options | 2 pin connector |
| On/off switch |
