Audited Supplier
Portable operating table/ Field operating table
This product is mainly developed to facilitate surgical treatment under environmental conditions such as emergency and disaster relief. Through innovative structural design, the bed board, legs and other main components are made of aviation aluminum alloy materials, which greatly reduces the weight of the product and can basically meet various needs. Surgical position, easy to unfold and retract. The operating table consists of a table top, a column, and a base (including bottom wheels). The table top is divided into a head board, a back board, a hip board, and a leg board. By controlling the handle, the self-locking gas spring is adjusted to realize the angle change of the back plate and leg plate; by adjusting the handle, the transmission parts such as worm gear, worm, gear and rack are driven to move, thereby realizing various movements of the operating table.
PRODUCT CHARACTERISTICS
01.Operating table table height adjustment operation: The operating table table height adjustment range is greater than 200mm, and the adjustment is achieved by rotating the screw that connects the two legs with a rocker. 02.Braking and releasing the operating table brake: Depress the two caster brakes with your feet to fix the operating table; lift the two caster brakes with your feet to release the operating table brake. Adjust the angle of the back plate: 03.The angle of the back plate is adjusted by shaking the handle. If you shake it clockwise, the back plate will fold; if you shake it counterclockwise, the back plate will fold down. 04.Leg board angle adjustment: Hold the leg board with your right (or left) hand, move the leg board operating handle with your left (or right) hand, rotate the leg board to the required position, release the leg board operating handle, and complete the leg board angle adjustment operation. 05.Head plate angle adjustment: loosen the head plate adjustment knob by hand, turn the head plate to the required position, tighten the knob to complete the head plate angle adjustment operation
Front and rear tilt angle | Front tilt≥20°,rear tilt≥15° |
Back plate folding angle | Upward bend≥75°,Downward bend≤18° |
Leg plate folding angle | Upward bend≥20°,Downward bend≤50° |
Head plate folding angle | Upward bend≥30°,Downward bend≤90° |
Table surface Specification | Length≥1950mm Width≤470mm(excluding side guide rails) |
Minimum table heigh | ≤740mm(Mattress not included) |
Table lift | ≥200mm |
Zhejiang Hongheng Medical Technology Co., Ltd. was established in 2022 (hereinafter referred to as Hongheng Medical). It was initiated by Mr. Zheng Jindi, an industrialist. Fangli Industry and Trade (Group) Co., Ltd. is an innovative enterprise that mainly acquires, merges and reorganizes, and specializes in independent design, A high-tech enterprise that produces and sells medical operating beds and other equipment is an enterprise that uses aerospace high-tech carbon fiber composite materials in the production of medical equipment. The main products are multi-functional series of imaging operation bed, orthopedic imaging operation bed, spinal surgery imaging operation bed, urology imaging operation bed, microscopic neurosurgery imaging operation bed, interventional imaging operation bed, X-ray diagnostic film bed, etc.
