Audited Supplier
LOI-I
Response on Customers' Questions Within 12 Hours.
12 Months
<500mm
<900kg
Material Testing Machine
<1000KN
0.5
Electronic Load
Dynamic Load
Digital
Manual Control
8kg
AC220V
Under
0 - 100%
ASTM D 2863, ISO 4589-2, Nes 714
Electrochemistry Type
Electro-Chemistry
Oxygen, Nitrogen and Propane
Limiting Oxygen Index Plastic Burning Analyzer
Measure Min. Oxygen Concentration of Combustion
Building Material, Cable, Rail, Plastic, etc.
Limiting Oxygen Index Testing Burning Analyzer
English
Digital
Manual
37cm * 30cm * 48cm
220V, 50Hz
Available
Delta
Packed in Plywood Case
37cm * 30cm * 48cm
China Mainland
9031809090
Product Description
LOI-I Limiting Oxygen Index Testing Fabric Plastic Burning Tester
Introduction:
LOI-I Limiting Oxygen Index Testing Fabric Plastic Burning Tester is a economic device to measure minimum oxygen concentration during combustion of specimen. It adapted Electrochemistry Type oxygen sensor which is precise and with low error rate.
Parameters:
Reference Standards:
Other Limited Oxygen Testers:
Introduction:
LOI-I Limiting Oxygen Index Testing Fabric Plastic Burning Tester is a economic device to measure minimum oxygen concentration during combustion of specimen. It adapted Electrochemistry Type oxygen sensor which is precise and with low error rate.
Parameters:
| No. | Item Name | LOI-I Limiting Oxygen Index Testing Fabric Plastic Burning Tester |
| 1 | Dimension | 370 mm (W) * 300 mm (D) * 480 mm (H) |
| 2 | Weight | 8kg |
| 3 | Power Supply | 115 Volts AC 60Hz / 230 Volts AC 50Hz |
| 4 | Gas Supplies | Oxygen, Nitrogen and Propane |
| 5 | Oxygen Sensor | Range:0 to 100% Oxygen |
| 6 | Lifetime of Oxygen sensor | 8 months to replace once, sensor is USD40.0/unit |
Reference Standards:
- ASTM: ASTM D2863: Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index).
- ISO: ISO 4589-2: Determining the minimum volume fraction of oxygen, in admixture with nitrogen, that will support combustion of small vertical test specimens under specified test conditions. The results are defined as oxygen index (OI) values.
- NES: NES 714.
- Electrochemistry Oxygen Cell for assessing accurate oxygen (< 0.1%) levels.
- Display of nitrogen and oxygen gas flow by flow meters.
- Digital display of oxygen percentage in atmosphere during test (no calculations needed).
- High temperature resistant quartz glass tube, can withstand a higher test temperature.
- Gas ignition device, easily adjust the length of the flame.
- Sample holders for both rigid and flexible samples supplied.
- More quicker response time.
- Repeatability (typical): ± 0.1% Oxygen.
