Audited Supplier
- High dehumidifying capacity
- Dry air with super low humidity can be easily obtained
- It is able to supply dry air with super low dew point less than -70 Celsius degree.
- Its dehumidification performance is more marked under the environment of low temperature and low humidity.
- Easy to operate and management, low operating cost
- Long life and durable
- Complete equipment model, perfect dehumidification function
- Environment protection, pollution-free
Supply Air Stream
Outside air is drawn into the unit using the supply fan.
The warm, moist outside air first passes through filters and then the cooling coil where it is cooled.
The air then goes through the desiccant wheel where the air is dehumidified and the temperature is raised.
At last the air is delivered directly to the space or into an existing air handler.
Exhaust Air Stream
Exhaust air is used to provide energy recovery for the desiccant wheel and is drawn into the unit using the exhaust fan.
The air filtered and then heated and humidified during the energy recovery process.
The air is then heated while passing through the regeneration coil.
The heated air removes the moisture that the desiccant wheel adsorbs from the process air stream.
| Model | ZCH-6000 | |||
| Process Airflow(m3/h) | 6000 | |||
| Supply Air Parameters | T=15-25ºC, RH≤1%), Dew Point DP≤-60ºC | |||
| Power of Process Fan(kw) | 7.5 | |||
| Surplus Pressure of the Unit(Pa) | ≥500 | |||
| Power of Regeneration Fan(kw) | 1.5 | |||
| Surplus Pressure of Regeneration (Pa) | ≥300 | |||
| First Rotor Regeneration | Electric (kw) | 12 | ||
| Steam (Kg/h) | 24 | |||
| Second Rotor Regeneration | Electric (kw) | 24 | ||
| Steam (Kg/h) | 48 | |||
| Steam Pressure(mPa) | 0.4 | |||
| Installed Power(kw) | Electric Mode | 45.2 | ||
| Steam Mode | 9.2 | |||
| Power Supply | 3Phase/380V/50Hz | |||
| Cooling Load(kw) | 90 | |||
| Dimension | Length(mm) | 7500 | ||
| Width(mm) | 1745 | |||
| Height(mm) | 1825 | |||
| Weight(kg) | 2200 | |||
