Audited Supplier
Lithium Cylindrical Battery Tester 5V 12A 8 Channels Lithium Battery Tester for 18650 Capacity testing
Battery tester equipment is an eight-channel battery analyzer to analyze polymer battery and cylindrical batteries from 12.0 mA to 12000 mA, up to 5V.This battery test system provides most applications in battery testing fields such as electrode materials research, battery performance test, small-scale battery formation, capability grading, battery pack testing and etc.
| Product Name: | Battery Testing Equipment 5V12A | ||||||
| Model No.: | ACEY-BT-5V12A | ||||||
| Input power | AC 220V ±10% / 50Hz | ||||||
| Input active power | 826W | ||||||
| Input Resistance | ≥1MΩ | ||||||
| Resolution | AD:16bit;DA:16bit | ||||||
| Voltage | Per Channel Voltage Range | 25mV~5V | |||||
| Discharge Min Voltage | 2V | ||||||
| Accuracy | ± 0.05% of FS | ||||||
| Stability | ± 0.05% of FS | ||||||
| Current | Per Channel Current Range | Range one:0.5mA~1A; Range two:1A~6A; Range three:6A~12A | |||||
| Accuracy | ± 0.05% of FS | ||||||
| Constant Voltage Cut-off Current | 2mA;12mA;24mA | ||||||
| Stability | ± 0.05% of FS | ||||||
| Power | Per Channel Output Power | 60W | |||||
| Stability | ±0.1% of FS | ||||||
| Time | Current Response Time | (0~Full Range)<1ms | |||||
| Step Time Range | ≤(365*24)Hour/Step | ||||||
| Data Recording | Recording Condition | The minimum time interval:100ms The minimum voltage interval:10mV The minimum current interval:2mA;12mA;24mA | |||||
| Record Frequency | 10Hz | ||||||
| Charge | Charge Mode | Constant Current Charge,Constant Voltage Charge,Constant Current and Constant Voltage Charge,CPC | |||||
| End Condition | Voltage,Current,Relative Time,Capacity,-△V | ||||||
| Discharge | Discharge Mode | CCD,CVD,CCVD,CPD,CRD | |||||
| End Condition | Voltage,Current,Relative Time,Capacity | ||||||
| Pulse | Charge | CCC | |||||
| Discharge | CCD | ||||||
| Min Pulse Width | 500ms | ||||||
| Pulse Number | Each pulse step supports 32 different pulses | ||||||
| Automated Switch | Automated switch from charge to discharge for each pulse | ||||||
| End Condition | Voltage, Test Time | ||||||
| Cycle | Loop Measure Range | 1~65535 times | |||||
| Max Steps Per Loop | 254 | ||||||
| Nested Loop | Nested loop Function,Max Support 3 Layers | ||||||
| Protection | Software Protection | Power-down Data Protection | |||||
| Off-line Testing Function | |||||||
| Setting Protection Condition,Setting Parameter:Low Voltage limit,Upper Voltage limit,Low Current limit,Upper Current limit,Delay Time | |||||||
| Noise | <85dB | ||||||
| Channel Features | Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure | ||||||
| Channel Control Mode | Independent Control | ||||||
| Voltage and Current Testing Sample | 4-wire connecting | ||||||
| Database | MySQL Database | ||||||
| A Means of Communication of Upper Machine | TCP/IP Protocol | ||||||
| Data Output | EXCEL,TXT,Graph | ||||||
| Communication Interface | Ethernet Port | ||||||
| Per Unit Main Channels No. | 8 | ||||||
| Working Temperature Range | 0ºC~40ºC | ||||||
| Storage Temperature Range | -10ºC~50ºC | ||||||
| Working Environment Relative Humidity Range | 30% ~ 80% RH | ||||||
| Storage Environment Relative Humidity Range | 30% ~ 90% RH | ||||||
| Dimensions | 3U2F,W*D*H:480*400*130(mm) | ||||||
Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port.
Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection.
C, After finished by QC full inspection before packing into the next process packing.
D, OQC before shipment for each slipper to do full inspection.
Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.
Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.
Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.
Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.
