Audited Supplier
DLTD7XP-10/16P
Water
Manual
Wafer
Centre Sealing
Force Sealed
Normal
Low Pressure (Pn<1.6mpa)
Normal Temperature (-40°C<T<120°C)
Soft Sealed
Casting
GB/T12238 API609 BS5155 En593
Industrial Usage, Water Industrial Usage
FVT
Wooden Case Packing
DN32-DN1600
Tianjin, China
8481809000
Product Description
Product feature
1. The connection is strong, the structural length is short, and can be used at the end of the pipeline
2. The valve disc closes quickly and the water hammer pressure is small
3.Horizontal pipe vertical pipe can be used, easy to install
4. Sensitive action, good sealing performance
5 Long service life, high reliability
1. The connection is strong, the structural length is short, and can be used at the end of the pipeline
2. The valve disc closes quickly and the water hammer pressure is small
3.Horizontal pipe vertical pipe can be used, easy to install
4. Sensitive action, good sealing performance
5 Long service life, high reliability
| NO. | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Name | Stem | Handle lever | Shaft sleeve | Sealing ring | Body | Seat | Disc |
| Material | Galvanized 45 gauge steel | Ductile iron | Polymer composite | EPDM | Stainless steel | Tetrafluororubber | Stainless steel |
| Product parameter | |
| Face to Face Design | ISO 5752-20/EN558-1/GB-T12221 |
| Flange Connection | ANSI Class125/150 JIS 5/10/16K AS2129 TableD/E BS4504 EN1092 PN6/10/16 |
| Working Pressure | 10/16bar |
| Testing Pressure | Shell Test:24bar / 2.4Mpa Seal Test:17.6bar/1.76Mpa |
| Working Temperature | -15°-450° |
| Nominal diameter | DN50-DN1200 |
Optional material
(According to your requirements to give you different material choices)
Optional parameter
(According to your requirements to give you different material choices)
| NO. | Body | Disc | Seat | Stem | Type of Operation |
| 1 | Ductile iron | Ductile iron | EPDM | Galvanized 45 gauge steel | Stamped iron handle |
| 2 | Stainless steel 304/316/316L | Stainless steel 304/316/316L | PTFE | Stainless steel 420/431 /304/316/316L | Cast iron handle |
| 3 | Aluminium alloy | Aluminum bronze | NBR | Die cast aluminum handle | |
| 4 | Cast steel | Stainless steel sulfide polytetrafluoroethylene | Heat-resistant EPDM | Motorized | |
| 5 | Cast iron | Ductile iron covered with nylon | Wear-resistant EPDM | Stainless steel stamped handle | |
| 6 | Aluminum bronze | Ductile iron covered with vulcanized rubber | Fluorine rubber | Stainless steel cast handle | |
| 7 | Stainless steel coated with PTFE | Silicone rubber | pneumatic | ||
| 8 | Ductile iron spray epoxy resin | Hypalon rubber | Duplex stainless steel 2205/2507/1.4469/1.4529 | Worm gear box | |
| 9 | Stainless steel spraying Halar | HNBR | Worm gear box with signal | ||
| 10 | Stainless steel sprayed nano-ceramics | Neoprene rubber | Hydraulic maneuver | ||
| 11 | Stainless steel coated with tungsten carbide | Rubber without copper or zinc | Copper alloy | ||
| 12 | Duplex stainless steel 2205/2507/1.4469/1.4529 | Insulating rubber |
Optional parameter
| NO. | Temperature | Stressstress | Specification | Flange connection standard | Structural form |
| 1 | -20~80° | PN6 | GB/T 12238 | DIN2543-2545 | Center line |
| 2 | -20-120° | PN10-16 | API 609 | ANSI B16.5 | Double eccentric |
| 3 | 0-150° | PN25 | BS 5155 | JIS B2220 | Triple eccentric |
| 4 | -20-200° | JIS5K/10K | EN 593 | BS4504 | |
| 5 | 125LB/150LB | EN1092 |
