Audited Supplier
Antique Bronze
Sheet
Polishing
Nickel base superalloy
Inconel 718
0.4-8mm
1000-1500mm
2000-6000mm
Black, Bright, Polished, Pickling
100kgs
Free-Sample
Cold Rolled, Hot Rolled
Annealed;Heat Treatment;
in Stock
Sheet
8
LORK
Wooden Package
inconel 718 Plate
China
7505120000
Product Description
Introduction
LORK is a super alloy manufacturer with 20 years of manufacturing experience.
Lork Group is engaged in offering best in class inconel 718 coil that can be accessible in varied specifications as per the industry requirement. Alloy 718 comprises of nickel-chromium, along with niobium and molybdenum, offering heat treatment-derived high strength, exceptional corrosion resistance, formability and weldability, plus resistance to strain age cracking, up to 700ºC.
Inconel 718 Characteristics
▪ Good mechanical properties - tensile, fatigue and creep-rupture
▪ Yield tensile strength, creep, and rupture strength properties are exceedingly high
▪ Highly resistant to chloride and sulfide stress corrosion cracking
▪ Resistant to aqueous corrosion and chloride ion stress corrosion cracking
▪ High temperature resistant
▪ Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
▪ Excellent welding characteristics, resistant to postweld age cracking
Inconel 718 Standards
▪ UNS N07718
▪ ASTM B637, ASTM B670
▪ AMS 5596, AMS 5662, AMS 5663, AMS 5832
▪ ASME Case 2222-1, SFA 5.14
▪ NACE MR0175
▪ EN 2.4668, Werkstoff 2.4668
▪ GE B50TF14, B50TF15
▪ Other common names: Alloy 718, Haynes 718, Nicrofer 5219, Allvac 718, Altemp 718
▪ Yield tensile strength, creep, and rupture strength properties are exceedingly high
▪ Highly resistant to chloride and sulfide stress corrosion cracking
▪ Resistant to aqueous corrosion and chloride ion stress corrosion cracking
▪ High temperature resistant
▪ Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
▪ Excellent welding characteristics, resistant to postweld age cracking
Inconel 718 Standards
▪ UNS N07718
▪ ASTM B637, ASTM B670
▪ AMS 5596, AMS 5662, AMS 5663, AMS 5832
▪ ASME Case 2222-1, SFA 5.14
▪ NACE MR0175
▪ EN 2.4668, Werkstoff 2.4668
▪ GE B50TF14, B50TF15
▪ Other common names: Alloy 718, Haynes 718, Nicrofer 5219, Allvac 718, Altemp 718
Inconel 718 Chemical Composition %
| Ni | 50-55 | Cr | 17-21 |
| Mo | 2.8-3.3 | Mn | 0.35 max |
| Cu | 0.23 max | Si | 0.35 max |
| C | 0.045 max | S | 0.01Max |
| P | 0.01 max | Co | 1.0 max |
| Cb+Ta | 4.87-5.2 | Pb | 1000 ppm |
| Se | 0.0005ppm | B | 50mmpa |
| Mg | 0.0006ppm | Ti | 0.8-1.15 |
| Al | 0.4-0.1 | Fe | Balance |
Inconel 718 Mechanical Properties
| Inconel 718 | Min | Max |
| Ultimate tensile strength, ksi | 150 | - |
| 0.2% yield strength, ksi | 120 | 145 |
| Elongation, % | 20% | - |
| Reduction of area, % | 35% | - |
| Impact Strength*Min average/ min single, ft-lbs | 40/35 | - |
| Hardness, Rockwell C | 32 | 40 |
Inconel 718 Applications
Inconel 718 is also used in the oil and gas drilling and production industries due to its high strength and resistance to chlorides, stress corrosion and sulfide stress cracking.
▪ Chemical processing
▪ Jet Engine,
▪ High Speed Airframe Parts,
▪ Wheels,
▪ Buckets And Spacers,
▪High Temperature Bolts,
▪ Fasteners.
Available Sizes And Specifications
| Inconel 718/ Inconel 718 API available sizes and specifications | |
| Grade | Inconel 718 |
| Nickel plate | Thickness: 0.3mm - 150.0mm Width: 1000mm - 3000mm |
| Nickel strip/ nickel foil | Thickness: 0.02mm - 16.0mm Width: 5mm - 3000mm |
| Nickel coil | Thickness: 0.3mm - 16.0mm Width: 1000mm - 3000mm |
| Nickel pipe | Outside diameter: 6mm - 1219mm Thickness: 0.5mm - 100mm |
| Nickel Capillary Pipe | Outside diameter: 0.5mm - 6.0mm Thickness: 0.05mm - 2.0mm |
| Nickel bar | Diameter: Ф4mm - Ф600mm |
| Nickel wire rod | Diameter:Ф0.01mm - Ф6mm |
Q1: Do you accept the trial order ?
A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .
Q2: Can I have free sample before making orders?
