Audited Supplier
WHAJ-NG300
Induction Heating Machine
ISO, SGS
Vertical Type
Whaj
3, 000, 000kcal/Hr
35~380nm3/H
DN80
380V-50Hz
3kpa
Electric Control Cabinet
3m3/Min
Larger Than 0.5MPa
3-20kpa
WHAJ
Standard Export Package
Tailored
China
Product Description
Natural gas is a high calorific value coal gas that is prone to detonation under normal conditions. Natural gas is used as the ignition fuel to ignite the ignition burner. After the ignition burner is ignited, the flame detector detects that there is fire inside the burner. Open the main natural gas pipeline valve, and natural gas is sprayed into the burner flame tube from the gas nozzle in multiple streams. After being ignited by the ignitor, it strongly mixes with the radial swirling wind and then uniformly mixes with the axial and tangential small streams of wind, forming a stream like flame that is sprayed into the furnace. The combustion air and fuel quickly mix near the nozzle, accelerating the combustion rate of the fuel, increasing the combustion temperature, and achieving a complete combustion. The flame detector tracks and detects the flame of the ignitor and the main flame. If the flame is extinguished, it sends a signal to the combustion controller in a timely manner, closes the natural gas valve, cuts off the natural gas delivery, and ensures the safety of extinguishing.
Base parameter
1. Gas calorific value: 8500 Kcal/m ³
2. Gas pressure: 3-20KPa
3. Gas density: p=0.75Kg/Nm ³
4. Combustion efficiency: ≥ 99%
Features
The burner adopts fully automatic proportional (air to gas ratio) adjustment, with a burner adjustment ratio of 1:20.
The control panel is simple and easy to operate.
The split type fan is equipped with a regulating valve to control the air damper and gas regulating valve, with high adjustment accuracy.
The air inlet is equipped with a soundproof cover, which ensures quiet and stable operation.
The ignition device on the burner is plug-in and easy to install.
Equipped with valve groups, the instruments are safe and reliable.
UV flame detection is safe and reliable.
The adjustment ratio of the burner is 1:20.
Base parameter
1. Gas calorific value: 8500 Kcal/m ³
2. Gas pressure: 3-20KPa
3. Gas density: p=0.75Kg/Nm ³
4. Combustion efficiency: ≥ 99%
Features
The burner adopts fully automatic proportional (air to gas ratio) adjustment, with a burner adjustment ratio of 1:20.
The control panel is simple and easy to operate.
The split type fan is equipped with a regulating valve to control the air damper and gas regulating valve, with high adjustment accuracy.
The air inlet is equipped with a soundproof cover, which ensures quiet and stable operation.
The ignition device on the burner is plug-in and easy to install.
Equipped with valve groups, the instruments are safe and reliable.
UV flame detection is safe and reliable.
The adjustment ratio of the burner is 1:20.
| Burner model | WHAJ-NG30 | WHAJ-NG60 | WHAJ-NG100 | WHAJ-NG200 | WHAJ-NG300 | WHAJ-NG500 |
| Heating capacity (Kcal ) | 30 | 60 | 100 | 200 | 300 | 500 |
| Consumption (Nm ³/H ) | 10~40 | 15~80 | 20~120 | 30~250 | 35~380 | 50~600 |
| Gas supply pressure ( KPa ) | 3~20 | 3~20 | 3~20 | 3~20 | 3~20 | 3~20 |
| Burner motor voltage | 380V-50Hz | 380V-50Hz | 380V-50Hz | 380V-50Hz | 380V-50Hz | 380V-50Hz |
| Combustion air Pressure(KPa ) | 3 | 3 | 3 | 3 | 3 | 3 |
| controller | PLC | PLC | PLC | PLC | PLC | PLC |
| Compressed air consumption (M ³/Min ) | 1.5 | 1.5 | 2 | 2 | 3 | 3 |
| Compressed air pressure (MPa) | ≥0.5 | ≥0.5 | ≥0.5 | ≥0.5 | ≥0.5 | ≥0.5 |
