Audited Supplier
BCS-50MS
for Whole Machine
12 Months
Weighing-type Filling Machine
Automatic
Powder
Single-Head
Single-Room Feeding
Capacity Cup
Pressure
Pneumatic Lifting
Rotary
Bag
Composite Materials
Automatic
New
Dose, Filling
Chemical Powder
Dry Mortar Packing
240-360bags/Hour
10-50kg
Air Floating
NW
Woodbox
CE
Jiangsu
8422309090
Product Description
BCS-50MS Valve bag packer
BCS-50MS automatic dosing valve bag packer is a new generation packer. It adopts low pressure pulse air floating conveying(patented technology), it transport the material uniformly by the low pressure pulse compressed air passing through the super wearable air-floating device, adjust automatic double stroke gate valve(patented technology) to fulfill fast feeding and precise feeding , output from ceramic spout, it is controlled by touch panel.
The packer is suitable for packing different type of raw materials. All powders with moisture content below than 5% and the mixture of powder and aggregate(≤5mm) can be packed, Such as industrial micro-powder, powdery pigment, powdery chemical, flour and food additives, all types of dry mortar and others.
Main character:
1. lower energy consumption
power consumption is 60w/hour, save energy 98% than traditional packer, air consumption is 0.1-0.2m3/minute, lower 80% than traditional packer.
Technical parameter:
Capacity: 4-6bags/min( note: different material, the packing speed is different)
Precision level: ±0.5%(within ±200g)
packing range: 10-50kg
division value: 10g
Material inlet size: Φ300mm
Ceramic spout size: Φ63mm( can change it to Φ50-60mm SUS spout)
Valve bag mouth size: ≥Φ70mm
Max. Aggregate granular size: 5mm
Working ambient: 0-40ºC, humidity≤90%RH, no dew
working power: AC220V/50HZ, 60W
Voltage fluctuation range: -15%~+10%
Frequency fluctuation range: ±2%
working air source: pressure≥0.6Mpa, air consumption is 0.2m3/min
Dust collection air volume:≥2000m3/h
Dimension: LXWXH=1000mmX550mmX1800mm
The brand of main part:
Air cylinder:Airtac
Magnetic valve:Airtac
Electric component: European brand
Weighing sensor:Keli
Touch panel:Kunlun tongtai(China)
Pneumatic butterfly valve:WAM, Italy
Electric control box:SUS304
Surface treatment: Whole machine is Electrostatic spray, mobile part is galvanized
BCS-50MS automatic dosing valve bag packer is a new generation packer. It adopts low pressure pulse air floating conveying(patented technology), it transport the material uniformly by the low pressure pulse compressed air passing through the super wearable air-floating device, adjust automatic double stroke gate valve(patented technology) to fulfill fast feeding and precise feeding , output from ceramic spout, it is controlled by touch panel.
The packer is suitable for packing different type of raw materials. All powders with moisture content below than 5% and the mixture of powder and aggregate(≤5mm) can be packed, Such as industrial micro-powder, powdery pigment, powdery chemical, flour and food additives, all types of dry mortar and others.
Main character:
1. lower energy consumption
power consumption is 60w/hour, save energy 98% than traditional packer, air consumption is 0.1-0.2m3/minute, lower 80% than traditional packer.
2. low-wear
It use low air pressure control, it's nearly no extrusion onto the material, the minimal friction reduce the abrasion of tank, no abrasion of mechanical transmission, the ceramic spout is anti-abrasive, 20-50 times than carbon steel, the friction factor is very small because of glazing outside and inside.3. small air pollution
it use low pressure instant flowrate control, the mixed air is very few during transportation, what's more, it is super low pressure(about 0.01-0.05Mpa), it avoid expanding the bag and breaking the bag and leakage, lower dust flying 70-90% than traditional packer.4. Control the packing precision efficiency
It is controlled by touch panel, simple and clear, adopt the double stroke gate valve, can adjust the feeding quantity automatic. The material is flowed, the impaction is small, easy to be controlled.5. High reliability
The pneumatic element is Airtac brand, the electric components are European brand, the butterfly valve is WAM.6. The operation panel is easy to learn
It has belt control button and hopper vibration button, it can empty the hopper without opening when change product type.Technical parameter:
Capacity: 4-6bags/min( note: different material, the packing speed is different)
Precision level: ±0.5%(within ±200g)
packing range: 10-50kg
division value: 10g
Material inlet size: Φ300mm
Ceramic spout size: Φ63mm( can change it to Φ50-60mm SUS spout)
Valve bag mouth size: ≥Φ70mm
Max. Aggregate granular size: 5mm
Working ambient: 0-40ºC, humidity≤90%RH, no dew
working power: AC220V/50HZ, 60W
Voltage fluctuation range: -15%~+10%
Frequency fluctuation range: ±2%
working air source: pressure≥0.6Mpa, air consumption is 0.2m3/min
Dust collection air volume:≥2000m3/h
Dimension: LXWXH=1000mmX550mmX1800mm
The brand of main part:
Air cylinder:Airtac
Magnetic valve:Airtac
Electric component: European brand
Weighing sensor:Keli
Touch panel:Kunlun tongtai(China)
Pneumatic butterfly valve:WAM, Italy
Electric control box:SUS304
Surface treatment: Whole machine is Electrostatic spray, mobile part is galvanized
