Audited Supplier
Spiral wound gasket graphite tape/Graphite Foil
The graphite strip of spiral wound gasket is cut into strips by special tools of high-precision CNC lathe. Compared with the traditional graphite strip, the precision is higher, the damage to the graphite strip is smaller, and the cutting part is smooth without burr, so it is used to produce the graphite spiral wound gasket filling material.
Performance features:
1. Excellent heat resistance and cold resistance.
2. Excellent chemical resistance.
3. Good self lubrication.
4. High rebound rate.
5. Easy to use and low cost.
Applicable medium of winding pad graphite tape:
Hot water, high temperature, high pressure, steam, heat exchange medium, ammonia, hydrogen, organic solvent, hydrocarbon, low temperature liquid, etc.
Common specification and size of graphite tape for winding pad:
Thickness: 0.5 ~ 1.0mm
Width: 5.6-6.0mm, 3.9-4.5mm for 4.5mm and 3.2mm respectively,
Please ask for other width with your inquiry .
Main performance parameters of winding pad graphite Foil/ Belt :
| (Item) | Value |
| (C concentration) | 99% |
| (S concentration) | <1000ppm<> |
| (chlorine concentration) | <45ppm |
| ( tensile strength) | 4.5MPa |
| (compressibility) | >40% |
| (recovery) | >10% |
| (Temperature) | -200ºC-600ºC |
| (Pressure) | 20MPa |
| (Terence of Thickness) | -0.04mm~+0.04mm |
| (Terence of Dimension) | According the Gasket size |
| (Terence of Density) | -0.06~g/cm3+0.06gcm3 |
Products Show Times :
Xingshi Graphite and Carbon , Welcome your inquiry !- Your trusted Chinese Supplier !
