Audited Supplier
M33
Alloy Steel Bar
ASTM
Ferrous Steel Scrap
Hot Rolled, Forged
Round, Square, Flat
Black, Grinded, Peeled, Polished, Rough Turned
Wear Resistant Steel
Structural Steel Bar
T11333
Diameter: 20-480mm
Annealed, Qunched and Tempered
Black, Grinded, Peeled, Polished, Rough Turned
ASTM -A600
FUSHUN
Apply The Shipping Packing
Diameter: 20-480mm
Hubei, Huangshi
7228600000
Product Description
Similar Grades:
T11333
Shape:
Round, Flat, Square.
Size Range:
Steel-making Condition:
EF, EF/EAF+LF+VD, EF/EAF+ESR
Delivery Condition:
Annealed , Quenched + Tempered
Surface Condition:
Black, Grinded, Peeled, Rough turned, Polished
Features:
1.Competitive price
2.Immediate delivery
3.Premium quality
4.Reliable service
5.MOQ: 1 Ton
Chemical Composition(%)
Fabrication and Heat Treatment
Forming
Conventional methods are used for forming of M33 molybdenum high speed tool steel.
Welding
M33 molybdenum high speed tool steel is weldable.
Machinability
M33 tool steel has medium machinability that is rated at 55% to 60%.
Forging
M33 tool steel is forged at 1121°C (2049°F) down to 954°C (1749°F). It has been recommended that forging below 927°C (1700°F) should not be carried out for M33 tool steel.
Heat Treatment
M33 tool steel is preheated to 787.8 °C (1450°F) and rapidly heated to 1204-1232°C (2199-2249°F). It is then held for 2 to 5 minutes. Salt bath, air quenching or oil can be used for heat treatment of M33 tool steel.
Annealing
Annealing for M33 tool steel takes place at 885°C (1625°F) and this is followed by cooling the steel slowly in a furnace at less than 4°C for an hour.
Cold Working
Conventional methods are followed for cold working of M33 tool steel.
Tempering
M33 too steel is tempered at 538 °C to 593°C (1000.4°F - 1099.4°F) for Rockwell C of 65 to 60. The tempering process is repeated to obtain better results.
Hardening
Tempering and heat treatment process details are applied for the hardening of M33 tool steel.
Hot Working
This process is carried out by consulting the supplier for lower temperature working information besides referring to the forging data.
Applications
M33 molybdenum high speed tool steel is used for all varieties of cutting tools.
T11333
Shape:
Round, Flat, Square.
Size Range:
| Diameter(mm) | Thickness (mm) | Width (mm) | Length(mm) | |
| Round | 20-480 | - | - | 2000-5800 |
| Square | 20-480 | - | - | 2000-5800 |
| flat | - | 20-50 | 80-600 | 2000-5800 |
Steel-making Condition:
EF, EF/EAF+LF+VD, EF/EAF+ESR
Delivery Condition:
Annealed , Quenched + Tempered
Surface Condition:
Black, Grinded, Peeled, Rough turned, Polished
Features:
1.Competitive price
2.Immediate delivery
3.Premium quality
4.Reliable service
5.MOQ: 1 Ton
| Packing details | In seaworthy packing, as your requirement. |
| Delivery details | within 30-50 days |
| C | Si | Mn | P | S | Cr | Mo | V | W | Co |
| 0.85-0.92 | 0.15-0.50 | 0.15-0.40 | 0.03max | 0.03max | 3.50-4.00 | 9.00-10.00 | 1.00-1.35 | 1.30-2.10 | 7.75-8.75 |
Fabrication and Heat Treatment
Forming
Conventional methods are used for forming of M33 molybdenum high speed tool steel.
Welding
M33 molybdenum high speed tool steel is weldable.
Machinability
M33 tool steel has medium machinability that is rated at 55% to 60%.
Forging
M33 tool steel is forged at 1121°C (2049°F) down to 954°C (1749°F). It has been recommended that forging below 927°C (1700°F) should not be carried out for M33 tool steel.
Heat Treatment
M33 tool steel is preheated to 787.8 °C (1450°F) and rapidly heated to 1204-1232°C (2199-2249°F). It is then held for 2 to 5 minutes. Salt bath, air quenching or oil can be used for heat treatment of M33 tool steel.
Annealing
Annealing for M33 tool steel takes place at 885°C (1625°F) and this is followed by cooling the steel slowly in a furnace at less than 4°C for an hour.
Cold Working
Conventional methods are followed for cold working of M33 tool steel.
Tempering
M33 too steel is tempered at 538 °C to 593°C (1000.4°F - 1099.4°F) for Rockwell C of 65 to 60. The tempering process is repeated to obtain better results.
Hardening
Tempering and heat treatment process details are applied for the hardening of M33 tool steel.
Hot Working
This process is carried out by consulting the supplier for lower temperature working information besides referring to the forging data.
Applications
M33 molybdenum high speed tool steel is used for all varieties of cutting tools.
