Audited Supplier
MHK-1050T Paper Box Fully Automatic Die Cutting and Creasing Machine with Four Side Stripping
The MHK series full-automatic/hot foil stamping/stripping/creasing die cutting machines can efficiently complete the die cutting and embossing of products,as well as maintaining the highest precision and product quality.The MHK series full-automatic/hot foil stamping/stripping/creasing die-cutting machines are well equipped and almost can adapt to all die cutting requirements of products.
Main features:
1. High quality feeder made in Taiwan with 4 suction nozzle for stack paper and 4 suction nozzle for delivering paper , ensures stable and fast paper feeding .
2. Pre-loading unit , non-stop feeding , with Max pile height to 1600mm.
3. The pre-loading unit is equipped with guiding rails , operator move the stack paper to feeder accurately and conveniently .
4. Side and front guiding have sensor which can adjust the sensitivity.
5. The anti-obstacle device prevent the machine damaged.
6. Paper feeding will be slow down when the paper reach the front guiding , achieve more accurate location .
7. Japanese NITA convey belt , the speed can be adjusted .
8. Germany made stainless steel is used for convey board in order to achieve smooth and quick paper delivery .
9. Pneumatic cutting plate lift for easy slide in and out .
10.Easy way to turn over and change die cutting chase and plate with short time .
11.High quality gripper bars made in Japan with long life time .
12.High quality U.K imported chain ensure stability and accuracy in long time running .
13.Automatic lubrication and cooling system for main drive and automatic lubrication for main chain .
14.Overload protection device with torque limiter in index box for the highest safety of operator and equipment .
15.Crank shafts and worm rod is made of 40 Cr with heating handling . Turbine is made of copper .
16.High quality imported air clutch .
17.SMC pneumatic components .
18.The upper , middle and lower stripping frames are controlled by 3 GPRS of cam wheels respectively.
19.Match with the centerline registration system in die cutting unit , the same system also apply to the stripping station to minimize changeover time , Accurate positioning can increase production efficiency.
Main Specifications:
| Model | MHK-1050T/TC | MHK-1050 | MHK-1050CE |
| Max.Sheet size | 1050*750 mm | 1050*750 mm | 1050*750 mm |
| Min. Sheet size | 400*360 mm | 400*360 mm | 400* 360 mm |
| Max.Die cut size | 1040*720 mm | 1040* 720mm | 1040*720 mm |
| Max Hot stamping size | 1040*720mm | No | No |
| Inner chase size | 1080*745mm | 1080*745 mm | 1080*745 mm |
| Paper thickness | 80-600g/m2 corrugated less than 4mm | 80-600g/m2 corrugated less than 4mm | 80-600g/m2 corrugated less than 4mm |
| Accuracy | less than 0.1mm | less than 0.1mm | less than 0.1mm |
| Max. pressure | 300T | 300T | 300T |
| Max die cut speed | 7500s/h | 7500 s/h | 7500 s/h |
| Max feeder pile height | 1600mm(include pallet) | 1600mm(include pallet) | 1600mm(include pallet) |
| Max delivery pile height | 1400mm(include pallet) | 1400mm(include pallet) | 1400mm(include pallet) |
| Max.foil diameter | 250mm(vertical) 200mm(horizontal) | No | No |
| Foil width | 20-1020 mm | No | No |
| Main motor | 11Kw | 11Kw | 11Kw |
| Overall size | 7700*5200*2600mm | 6300*4600*2400mm | 7700*4600*2400mm |
| Machine weight | 18.5 Ton | 16 Ton | 17 Ton |
| Full power | 52 Kw |
