MW Automatic Arm Swing Gate Opener

Automatic Arm Swing Gate Opener

Before installing: Read carefully this instruction manual and verify following points.
Pillars supporting your gate must be solid and stable. Verify your gate, must be in good state, correctly installed and balanced, it must open easily and without friction points. If gate has friction points, installer must remove it before to install the automation, otherwise installation couldn't work properly.
Provide a free space close to the gate for maintenance and manual unlock.

Verify that wing's weight and length doesn't exceed what mentioned in the technical characteristics in this manual.

Warnings: First of all verify that this product is suitable for the installation. Read carefully technical characteristic before the installation (kind of gate, max allowed wing weight and length, etc). Be sure the gate satisfies all requirements of quality, robustness and stability.
Installation of this automatism must be properly done by qualified installers, following rules and regulations of installation country.
It's mandatory do periodic maintenance each 6 month. Maintenance or repairing must be done by qualified technicians. Turn power off before maintenance or repairing.
This device is intended for gate automation, any other applications is strongly advised.
Not respecting of rules may cause serious damage to peoples, animals, things. Manufacturer discharges all responsibility for missed respect of rules.
Don't let remotes or gate controls unattended or where children can reach.

Soft start and soft stop;
Emergency release key in case of power failure;
Dual/single gate running mode;
Adjustable opening/closing inteval between master and slave gate;
Stop/Reverse in case of obstruction during gate opening/closing;
Built in adjustable auto-close
Digital display indicates the running situation and setting menu;
Reliable electromagnetism limit for easy adjustment; 
Bulit in max Motor running time(MRT) adjustable for multiple safety protection