Audited Supplier
JT-JZ
Online Service
12 Months
Cone
Steel Ball, Profile, Rolling Beam, Steel Billet, Cogged Ingot, Cone
Horizontal
Three-High
as Required
Cold Rolling Mill
Jotun
Sea Worthy
3200*2000*2500mm
China
Product Description
Products Description
Cone Rolling Machine
Cone rolling machine is mainly composed of tapered work rollers (one upper roller, two down rollers), frame (steel plate
splicing), hydraulic moving system, power and transmission system, control system, etc. Three rollers are fully driven, three
rollers are tapered, and the line speed is automatically matched, making it easier to roll tapered workpieces without slipping.
splicing), hydraulic moving system, power and transmission system, control system, etc. Three rollers are fully driven, three
rollers are tapered, and the line speed is automatically matched, making it easier to roll tapered workpieces without slipping.
Product Parameters
Model | JT-10*1500 mm | |||
Max Rolling Thickness | 10(SUS)mm | |||
Max Rolling Width | 1500mm | |||
Motor Power | 4*3kw | |||
Hydraulic station motor power | 5.5kw | |||
Reducer | 3BW | |||
Rolling range(r--R--θ) | 25-750-60°Mm | |||
Machine Size | 3200*2000*2500mm | |||
Machine Weight | 7.5Tons | |||
Roller diameter | 420mm | |||
Roller material | 42CrMo forging surface quenched | |||
Oil cylinder material | 45 # steel, heat treated HRC48-50 | |||
Conical barrels with a small blanking radius of R or more, a large radius of R or less, and a blanking angle of θ or more can be rolled. | ||||
Effect Display
Product Features
Calculate the rated load of the equipment based on the 60-degree cone barrel, maximum thickness, and
maximum rolling width of the finished workpiece.
* There are 3 working motors, all of which rotate synchronously and actively, and are selected according to 1.2 times the rated
load.
* Three cycloidal pinwheel reducers, selected according to 1.5 times the rated load.
* The connection between the reducer and the shaft is installed with a shaft, the machined surface and coaxiality are precise,
and the coupling is not hard-connected, so the reducer is not easily damaged.
* Maximize the diameter of the shaft head and select the bearing according to 2.5 times the rated load.
* Control the wireless remote control.
* The hydraulic station is equipped with a two-link solenoid valve, an electromagnetic relief valve, and an axial piston pump.
*The hydraulic cylinder should be selected based on twice the rated load at 25MPA.
maximum rolling width of the finished workpiece.
* There are 3 working motors, all of which rotate synchronously and actively, and are selected according to 1.2 times the rated
load.
* Three cycloidal pinwheel reducers, selected according to 1.5 times the rated load.
* The connection between the reducer and the shaft is installed with a shaft, the machined surface and coaxiality are precise,
and the coupling is not hard-connected, so the reducer is not easily damaged.
* Maximize the diameter of the shaft head and select the bearing according to 2.5 times the rated load.
* Control the wireless remote control.
* The hydraulic station is equipped with a two-link solenoid valve, an electromagnetic relief valve, and an axial piston pump.
*The hydraulic cylinder should be selected based on twice the rated load at 25MPA.
Products Show
Certifications
