Audited Supplier
a12
1.53kg
27000-28000rpm
15W
1 Set
BT
Carton
21*26*10cm
Guangzhou
Product Description
Manicure Pedicure Kit nail art machine
Instructions:
Don't change the turning directions too frequently, otherwise it will damage the grinding head.
Turn the SPEED CONTROL counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0.
After operation, put the grinding head on the top of the main panel.
While the grinding head is in operation, never pull out the 5-pin plug of the portable grinding head.
For long idle time, please disconnect the source power.
Any unauthorized disassembling of the prohibited. In case of any breakdown, please contact the agent or authorized repair center, we promise swift, high-quality and satisfactory service.
If the supply cord if damaged, it must be replaced by the manufacturer, its service agent or similarly persons in order avoid a hazard.
The apparatus is not ready for the physically weak, slow response or a mental disorder of persons(including children) to use, except in the security responsibility of the guidance or assistance.
| For main power supply&control part | |
| Rated voltage range: | 220-240v 50hz |
| Rated power input: | 15w |
| Output rated voltage: | DC 0-18V |
| Output current: | 1.0A |
| For handpiece(motor) part: | |
| Working voltage: | DC 0-18V |
| Rated current: | 1.0A |
| No load speed: | 29000-30000rpm |
| Load speed: | 27000-28000rpm |
Instructions:
Don't change the turning directions too frequently, otherwise it will damage the grinding head.
Turn the SPEED CONTROL counterclockwise to decelerate the grinding head to the minimum before turning off and switch the main power source to 0.
After operation, put the grinding head on the top of the main panel.
While the grinding head is in operation, never pull out the 5-pin plug of the portable grinding head.
For long idle time, please disconnect the source power.
Any unauthorized disassembling of the prohibited. In case of any breakdown, please contact the agent or authorized repair center, we promise swift, high-quality and satisfactory service.
If the supply cord if damaged, it must be replaced by the manufacturer, its service agent or similarly persons in order avoid a hazard.
The apparatus is not ready for the physically weak, slow response or a mental disorder of persons(including children) to use, except in the security responsibility of the guidance or assistance.
