When the self-cleaning brush screen filter recognizes too much dirt building up on the surface of the filter screen as well as a pressure difference between the inlet and outlet water reaching a preset value, it will automatically start its self-cleaning program. This entails the motor driving a rotating brush to remove the dirt buildup from the filter screen and switch on the electric valve for discharging the dirt. This effectively cleans the filter back into its optimal filtering state.
characteristic
- SSY manual self-cleaning filter
- Installation: online installation
- Flow rate (single filter): 15-80 m³/h (larger flow can be obtained by connecting multiple units in parallel)
- Nominal pressure: 1.0 MPa, 1.6 MPa
- Operating pressure: 0.20-1.0 MPa
- Maximum operating temperature: 60 ºC
- Filtration degree: 200-3500 micron
- Control mode: manual
- Cleaning time: 15-120 s
- Cleaning method: manual brush cleaning
- Cleaning pressure loss: 0.01-0.08 MPa

Technical Specifications
Model | Inlet/outlet connection (mm) | Max. flow rate (m³/h) | Filtration area (cm²) | Drain valve DN (mm) | D mm | Water consumption per cycle (L) | Weight (kg) |
SSY-50 | DN50/10 | 25 | DN25/10 | 275 | 60 | 50 | |
SSY-80 | DN80/10 | 40 | DN25/10 | 275 | 60 | 60 | |
SSY-100 | DN100/10 | 80 | DN25/10 | 275 | 80 | 120 |
The flow accuracy in the table is 400 μm. For other technical parameters, please consult Xuyang for details.
Model | SY-50 | SY-80 | SY-100 | SY-150 | SY-200 | SY-250 |
H | 720 | 750 | 820 | 850 | 980 | 1020 |
L | 720 | 720 | 760 | 800 | 1050 | 1080 |
L1 | 335 | 335 | 410 | 435 | 350 | 360 |
Self Cleaning Filter For Water Treatment




Our Exhibition



Packing & Shipping
