


Features:
1. Filling depth and tablet thickness can be adjustable.
2. Simple and convenient to operate
3. Molds/dies can be customized.
There are thousands of different types of powders, not all of which can be pressed into flakes.
There are some requirements for powders for pill maker, as follows:
1,The powder should be dry and sticky.
2,The powder should have circulation.
3,The powder should be about 80-120 mesh and uniform in thickness.
4,There should be different materials together to press tablets, must be stirred evenly.
Tablet outlet: made of stainless steel with smooth surface treatment, which can effectively reduce the lack of edges, cracks, deformation and other problems caused by the tablets when discharging.
Punching die installation position: all kinds of various punching dies can be customized and installed on the use, simple and convenient. The filling depth of the material and the thickness of the pressed tablets can be adjusted.
Pressure size adjustment: turn to the left to move down the core rod, the pressure increases the hardness of the pressed tablets: turn to the right to reduce the pressure, the hardness of the tablets is reduced.
Hand crank handle: purely manual rotation, quiet and low noise. After skillful hands, the output will be increased.


Technical parameters:
Model | YP-1 |
Material | Aluminum alloy |
Adjustable pressure | 15 kn |
Dia. of tablet | 12 mm |
Filling depth | 11 mm |
Output | 30-50 pieces |
Weight | 20 Kg |
Package | Wooden case |