Audited Supplier
GT-100T
Hydraulic Machine
Mold Forging
Hydraulic Pressure
Automation
CE
12 Months
Use Widely
New
1-15mm
28mpa
Xingtai
Shrinkwrap and Iron Box
CE, ISO9001: 2008
China
8462919000
Product Description
Xingtai wire rope press machines are used to make pressed wire rope sling. The body of swagers are manufactured from one single block construction that ensure strength, long service life and a minimum of maintenance. All swagers are thoroughly test run and are supplied with a full tank of oil.
1. It uses a mechanical and electrical design, to switch to a different mold, you can suppress the different specifications of wire rope, easy to operate and safe.
2. Dual control for hydraulic system, the overflow valve, magnetic contact on the pressure gauge can be accurately controlled.
3. Electric control parts of the low-voltage control, an increase of operating system security.
4. Pull the rope to suppress large, beautiful, fast, and a wire rope press-fit just a few minutes to complete, significantly reduced the labor intensity and improve the work efficiency.
5. Xingtai wire rope press machine have exported to many countries, UK, Australia, Holland, Latvia, Malaysia, Thailand, India, Nigeria, Russia, Botswana and so on.
1. It uses a mechanical and electrical design, to switch to a different mold, you can suppress the different specifications of wire rope, easy to operate and safe.
2. Dual control for hydraulic system, the overflow valve, magnetic contact on the pressure gauge can be accurately controlled.
3. Electric control parts of the low-voltage control, an increase of operating system security.
4. Pull the rope to suppress large, beautiful, fast, and a wire rope press-fit just a few minutes to complete, significantly reduced the labor intensity and improve the work efficiency.
5. Xingtai wire rope press machine have exported to many countries, UK, Australia, Holland, Latvia, Malaysia, Thailand, India, Nigeria, Russia, Botswana and so on.
| Mode No. | GT-100T | GT-200T | GT-300T | GT-400T | GT-500T | GT-650T | GT-1000T |
| Max press power (KN) | 1000 | 2000 | 3000 | 3000 | 5000 | 6500 | 10000 |
| Max wire rope diameter in one pressing (mm) | Φ13 | Φ20 | Φ24 | Φ28 | Φ32 | Φ38 | Φ44 |
| Max wire rope diameter in multi-pressing (mm) | Φ15 | Φ22 | Φ32 | Φ36 | Φ42 | Φ48 | Φ56 |
| Power (KW) | 1.5 | 2.2 | 3 | 3 | 4 | 5.5 | 7.5 |
| Max working pressure (Mpa) | 56Mpa | 56Mpa | 56Mpa | 56Mpa | 56Mpa | 56Mpa | 58Mpa |
| Max piston movement (mm) | 78 | 80 | 80 | 80 | 120 | 160 | 160 |
| The up speed of piston (mm/sec) | 8 | 8 | 4.5 | 4.5 | 4.5 | 4.5 | 4.8 |
| The down speed of piston (mm/sec) | 10 | 10 | 4.5 | 4.5 | 8 | 8 | 10 |
| Total length (mm) | 1100 | 1100 | 1200 | 1200 | 1550 | 1550 | 2550 |
| Total width (mm) | 550 | 550 | 650 | 650 | 650 | 650 | 1100 |
| Total height (mm) | 1300 | 1300 | 1400 | 1400 | 1600 | 1600 | 2100 |
| Net weight (kg) | 600 | 900 | 1000 | 1000 | 2500 | 3000 | 5500 |
