Audited Supplier
LTLS1001250046-004
Carbon Steel
Round Head
Common Bolt
Round
DIN, ANSI, GB, JIS, BSW, GOST, as The Customer Required
10.9
Machinery, Chemical Industry, Environmental, Building, as The Customer Required
Blue-White Zinc Plated
Wheel Lug Stud
10
1.25
46.5mm
Single Thread
Natural, Black Coating, Zinc
S25c, 35, 45
Single
10.9
Cold Heading
Sample Free, Freight Is on Your Own Account
16.3mm
as the customer required
Carton
M10
China
7318151090
Product Description
This is a 1/2-20 inch Zinc drive-in trailer hub stud, designed to fit into trailer hubs on 2,000 lb to 7,000 lb capacity axles. This 2-inch length stud has a threaded length of 1.25 inches, so it is a good replacement for idler trailer hubs, integral disc brake rotors, and drum hubs installed on utility trailers, RV trailers, enclosed trailers, and livestock trailers. You will commonly see this size stud on hubs with 5 to 8 lug bolt patterns, using 1/2" - 20 lug nuts. The stud is installed by hammering in the replacement stud into the spot that you are replacing a missing or damaged stud, and then torquing down the stud with a nut and wrench until it is fully seated into place. If you need to replace the studs on your trailer's hub studs, these 1/2 inch Zinc replacements are a great option for getting you back on the road safely!
We produce all types of standard or non-standard thread screws according to customer's request.Detailed as following table:
| Specification Table of Thread Screw | |||||
| Standard | Size | Pitch of thread (mm) | d(mm) | Wire Diameter ±0.02mm | |
| Max | Min | ||||
| Chinese National Standard Coarse Thread 60° | M5 | 0.80 | 4.98 | 4.83 | 4.30 |
| M6 | 1.00 | 5.97 | 5.82 | 5.18 | |
| M7 | 1.00 | 6.97 | 6.82 | 6.18 | |
| M8 | 1.25 | 7.96 | 7.79 | 7.02 | |
| M9 | 1.25 | 8.96 | 8.79 | 8.01 | |
| M10 | 1.50 | 9.96 | 9.77 | 8.84 | |
| M11 | 1.50 | 10.97 | 10.73 | 9.84 | |
| M12 | 1.75 | 11.95 | 11.76 | 10.7 | |
| M14 | 2.00 | 13.95 | 13.74 | 12.5 | |
| M16 | 2.00 | 15.95 | 15.74 | 14.5 | |
| M18 | 2.50 | 17.95 | 17.71 | 16.20 | |
| M20 | 2.50 | 19.95 | 19.71 | 18.2 | |
| Chinese National Standard Fine Thread 60° | M5 | 0.50 | 4.97 | 4.86 | 4.57 |
| M6 | 0.75 | 5.97 | 5.85 | 5.41 | |
| M7 | 0.75 | 6.97 | 6.85 | 6.41 | |
| M8 | 1.00 | 7.97 | 7.83 | 7.24 | |
| M9 | 1.00 | 8.97 | 8.83 | 8.24 | |
| M10 | 1.00 | 9.97 | 9.82 | 9.23 | |
| M10 | 1.25 | 9.96 | 9.81 | 9.07 | |
| M12 | 1.25 | 11.97 | 11.76 | 11.07 | |
| M12 | 1.50 | 11.96 | 11.79 | 10.89 | |
| M14 | 1.50 | 13.96 | 13.79 | 12.89 | |
| M16 | 1.50 | 15.96 | 15.79 | 14.89 | |
| M18 | 1.50 | 17.95 | 17.73 | 16.86 | |
| M20 | 1.50 | 19.95 | 19.65 | 18.85 | |
| Specification Table of Thread Screw | |||||
| Standard | Size | Thread per inch | d(mm) | Wire Diameter ±0.02mm | |
| Max | Min | ||||
| British Standard Whitworth Thread (Coarse) 55° | 1/8 | 40 | 3.145 | 3.03 | 2.70 |
| 5/32 | 32 | 3.945 | 3.795 | 3.38 | |
| 3/16 | 24 | 4.732 | 4.592 | 4.00 | |
| 1/4 | 20 | 6.32 | 6.165 | 5.45 | |
| 5/16 | 18 | 7.905 | 7.737 | 6.94 | |
| 3/8 | 16 | 9.49 | 9.312 | 8.4 | |
| 7/16 | 14 | 11.2 | 10.88 | 9.84 | |
| 1/2 | 12 | 12.66 | 12.46 | 11.22 | |
| 9/16 | 12 | 14.25 | 14.04 | 12.81 | |
| 5/8 | 11 | 15.83 | 15.61 | 14.27 | |
| Unified Coarse Pitch Thread ( American Standard) 60° | 4# | 40 | 2.824 | 2.695 | 2.37 |
| 5# | 40 | 3.154 | 3.026 | 2.69 | |
| 6# | 32 | 3.484 | 3.333 | 2.91 | |
| 8# | 32 | 4.142 | 3.991 | 3.57 | |
| 10# | 24 | 4.80 | 4.618 | 4.05 | |
| 12# | 24 | 5.461 | 5.279 | 4.7 | |
| 1/4 | 20 | 6.322 | 6.117 | 5.45 | |
| 5/16 | 18 | 7.907 | 7.687 | 6.93 | |
| 3/8 | 16 | 9.491 | 9.254 | 8.40 | |
| 7/16 | 14 | 11.08 | 10.82 | 9.83 | |
| 1/2 | 13 | 12.66 | 12.39 | 11.32 | |
| 9/16 | 12 | 14.25 | 13.96 | 12.8 | |
| 5/8 | 11 | 15.83 | 15.53 | 14.26 | |
| Unified Fine Pitch Thread ( American Standard) 60° | 4# | 48 | 2.877 | 2.713 | 2.44 |
| 5# | 44 | 3.157 | 3.036 | 2.73 | |
| 6# | 40 | 3.484 | 3.356 | 3.02 | |
| 8# | 36 | 4.145 | 4.006 | 3.63 | |
| 10# | 32 | 4.803 | 4.651 | 4.23 | |
| 12# | 28 | 5.461 | 5.296 | 4.81 | |
| 1/4 | 28 | 6.324 | 6.16 | 5.68 | |
| 5/16 | 24 | 7.909 | 7.727 | 7.16 | |
| 3/8 | 24 | 9.497 | 9.315 | 8.74 | |
| 7/16 | 20 | 11.08 | 10.87 | 10.18 | |
| 1/2 | 20 | 12.67 | 12.46 | 11.76 | |
| 9/16 | 18 | 14.25 | 14.03 | 13.25 | |
| 5/8 | 18 | 15.83 | 15.62 | 14.83 | |
| Advanced Planning | Process Control | Quality Issue Feedback |
| ·Multi-functional project team ·Build up standard tree,do the analysis and training ·DFMEA ·4 stage project review, quality gate ·PFMEA ·Visualized WI | ·First and final piece100% inspection. ·Combine self-inspect and patrol inspect. ·Regular inspection on fixture and gauges. ·Upper andlower process error prevention control ·5M1E management | ·Quick feedback, arrive sitewithin 10 minutes ·Define interim and containment action within 4hours ·Daily quick response meeting ·8D ·6 Sigma ·Actions follow-upvalidation ·Share to similarproducts ·Record into failure mode database |
Q1: Are you a manufacturer?
Yes, we have been in manufacturing and providing excellent linear motion partsfor customers more than 20years.
Q2: How long could you prepare samples?
Ans:Normally 1days if we have the sample onhand.lf customized one. about a week around.
Q3: How about batch order production?
Ans: Normally 30days or so for one container
Q4: Do you inspect the finished products?
Ans:Yes, we will do inspection according to lsO standard and ruled by our QCstaff.
Q5: How do you ship the goods?
Ans: By sea, by air by truck or by courier(UPSDHLFedexTNT etc.)
Q6: What advantage do you have?
Ans:1.We have professional engineers,customers can expect the best possibleadvice and support.
2.Related responsible team to answer all your questions and follow-upprocess for you and do update in time.
3.Strict and standard process control according to Quality ManagementSystem.4.Documents support on products, we have strong technical data sheet tosupport our products, which could make you easier to know our products.
