Audited Supplier
Thread Locking Adhesive Patch
Adhesive Patch
MICRO ENCAPSULATED FASTENERFasteners with Micro-Encapsulated Adhesive Thread Locking Patch
Pre-applied single-use adhesive thread patch, which offers a lower assembly torque than a nylon prevailing torque type patch, but gives a high breakaway torque and the locking reliability of most other self-locking fasteners.
Thread Patch
Pre-applied adhesives are dry to touch two-part epoxy system or a single part anaerobic adhesive in micro-encapsulated, microbubble form.
Thread Seal
The material is positioned in a 360deg band around the threaded portions of the fastener; when rotated against its mating thread, causes the capsules of adhesive to burst, releasing the material in and around the thread flanks, which then cures and forms a solid fill locking band.
Screw Thread Locking
Various types of patches are available, each offering different strength and temperature performance and because of the 360deg thread coverage, they also give excellent sealing properties as well as thread locking.
We produce all types of standard or non-standard thread screws according to customer's request.Detailed as following table:
| Specification Table of Thread Screw | |||||
| Standard | Size | Pitch of thread (mm) | d(mm) | Wire Diameter ±0.02mm | |
| Max | Min | ||||
| Chinese National Standard Coarse Thread 60° | M5 | 0.80 | 4.98 | 4.83 | 4.30 |
| M6 | 1.00 | 5.97 | 5.82 | 5.18 | |
| M7 | 1.00 | 6.97 | 6.82 | 6.18 | |
| M8 | 1.25 | 7.96 | 7.79 | 7.02 | |
| M9 | 1.25 | 8.96 | 8.79 | 8.01 | |
| M10 | 1.50 | 9.96 | 9.77 | 8.84 | |
| M11 | 1.50 | 10.97 | 10.73 | 9.84 | |
| M12 | 1.75 | 11.95 | 11.76 | 10.7 | |
| M14 | 2.00 | 13.95 | 13.74 | 12.5 | |
| M16 | 2.00 | 15.95 | 15.74 | 14.5 | |
| M18 | 2.50 | 17.95 | 17.71 | 16.20 | |
| M20 | 2.50 | 19.95 | 19.71 | 18.2 | |
| Chinese National Standard Fine Thread 60° | M5 | 0.50 | 4.97 | 4.86 | 4.57 |
| M6 | 0.75 | 5.97 | 5.85 | 5.41 | |
| M7 | 0.75 | 6.97 | 6.85 | 6.41 | |
| M8 | 1.00 | 7.97 | 7.83 | 7.24 | |
| M9 | 1.00 | 8.97 | 8.83 | 8.24 | |
| M10 | 1.00 | 9.97 | 9.82 | 9.23 | |
| M10 | 1.25 | 9.96 | 9.81 | 9.07 | |
| M12 | 1.25 | 11.97 | 11.76 | 11.07 | |
| M12 | 1.50 | 11.96 | 11.79 | 10.89 | |
| M14 | 1.50 | 13.96 | 13.79 | 12.89 | |
| M16 | 1.50 | 15.96 | 15.79 | 14.89 | |
| M18 | 1.50 | 17.95 | 17.73 | 16.86 | |
| M20 | 1.50 | 19.95 | 19.65 | 18.85 | |
| Specification Table of Thread Screw | |||||
| Standard | Size | Thread per inch | d(mm) | Wire Diameter ±0.02mm | |
| Max | Min | ||||
| British Standard Whitworth Thread (Coarse) 55° | 1/8 | 40 | 3.145 | 3.03 | 2.70 |
| 5/32 | 32 | 3.945 | 3.795 | 3.38 | |
| 3/16 | 24 | 4.732 | 4.592 | 4.00 | |
| 1/4 | 20 | 6.32 | 6.165 | 5.45 | |
| 5/16 | 18 | 7.905 | 7.737 | 6.94 | |
| 3/8 | 16 | 9.49 | 9.312 | 8.4 | |
| 7/16 | 14 | 11.2 | 10.88 | 9.84 | |
| 1/2 | 12 | 12.66 | 12.46 | 11.22 | |
| 9/16 | 12 | 14.25 | 14.04 | 12.81 | |
| 5/8 | 11 | 15.83 | 15.61 | 14.27 | |
| Unified Coarse Pitch Thread ( American Standard) 60° | 4# | 40 | 2.824 | 2.695 | 2.37 |
| 5# | 40 | 3.154 | 3.026 | 2.69 | |
| 6# | 32 | 3.484 | 3.333 | 2.91 | |
| 8# | 32 | 4.142 | 3.991 | 3.57 | |
| 10# | 24 | 4.80 | 4.618 | 4.05 | |
| 12# | 24 | 5.461 | 5.279 | 4.7 | |
| 1/4 | 20 | 6.322 | 6.117 | 5.45 | |
| 5/16 | 18 | 7.907 | 7.687 | 6.93 | |
| 3/8 | 16 | 9.491 | 9.254 | 8.40 | |
| 7/16 | 14 | 11.08 | 10.82 | 9.83 | |
| 1/2 | 13 | 12.66 | 12.39 | 11.32 | |
| 9/16 | 12 | 14.25 | 13.96 | 12.8 | |
| 5/8 | 11 | 15.83 | 15.53 | 14.26 | |
| Unified Fine Pitch Thread ( American Standard) 60° | 4# | 48 | 2.877 | 2.713 | 2.44 |
| 5# | 44 | 3.157 | 3.036 | 2.73 | |
| 6# | 40 | 3.484 | 3.356 | 3.02 | |
| 8# | 36 | 4.145 | 4.006 | 3.63 | |
| 10# | 32 | 4.803 | 4.651 | 4.23 | |
| 12# | 28 | 5.461 | 5.296 | 4.81 | |
| 1/4 | 28 | 6.324 | 6.16 | 5.68 | |
| 5/16 | 24 | 7.909 | 7.727 | 7.16 | |
| 3/8 | 24 | 9.497 | 9.315 | 8.74 | |
| 7/16 | 20 | 11.08 | 10.87 | 10.18 | |
| 1/2 | 20 | 12.67 | 12.46 | 11.76 | |
| 9/16 | 18 | 14.25 | 14.03 | 13.25 | |
| 5/8 | 18 | 15.83 | 15.62 | 14.83 | |
| Advanced Planning | Process Control | Quality Issue Feedback |
| ·Multi-functional project team ·Build up standard tree,do the analysis and training ·DFMEA ·4 stage project review, quality gate ·PFMEA ·Visualized WI | ·First and final piece100% inspection. ·Combine self-inspect and patrol inspect. ·Regular inspection on fixture and gauges. ·Upper andlower process error prevention control ·5M1E management | ·Quick feedback, arrive sitewithin 10 minutes ·Define interim and containment action within 4hours ·Daily quick response meeting ·8D ·6 Sigma ·Actions follow-upvalidation ·Share to similarproducts ·Record into failure mode database |
Q1: Are you a manufacturer?
Yes, we have been in manufacturing and providing excellent linear motion partsfor customers more than 20years.
Q2: How long could you prepare samples?
Ans:Normally 1days if we have the sample onhand.lf customized one. about a week around.
Q3: How about batch order production?
Ans: Normally 30days or so for one container
Q4: Do you inspect the finished products?
Ans:Yes, we will do inspection according to lsO standard and ruled by our QCstaff.
Q5: How do you ship the goods?
Ans: By sea, by air by truck or by courier(UPSDHLFedexTNT etc.)
Q6: What advantage do you have?
Ans:1.We have professional engineers,customers can expect the best possibleadvice and support.
4.Documents support on products, we have strong technical data sheet tosupport our products, which could make you easier to know our products.
