Audited Supplier
Oil seal is also known as rotary shaft seal. They are commonly referred to as grease, liquid, or dirt seals.
Oil seal is an indispensable part of any rotating and moving component assembly. They enclose the space between stationary and moving parts in mechanical equipment. Oil seals typically consist of three basic components: a sealing element (nitrile rubber component), a metal casing, and a spring. It is a widely used sealing component.
Temperature: -50 ° C-300 ° C depending on rubber material pressure: up to 0.03 MPa reciprocating speed: 0-20m/S medium: mineral oil, water, grease specifications: 6-13000mm
Product Features
Feature
A. Ozone and chemical resistance
B Good temperature resistance
C Excellent weather resistance and water resistance
D Dust prevention and sealing E Good compressibility, flexibility, and elasticity F Good shock-absorbing materials used in the vulcanization process:
---FKM rubber
---Nitrile rubber
---EPDM rubber
---HNBR rubber
---Silicone rubber
---ACM rubber
Advantages of rubber vulcanized profiles:
---Flexible and durable
---Weather resistant
---Well sealed
---Economical and affordable
Carefully adjusted by engineers to meet the complex and ever-changing practical environment
The upgraded version of the three lip mouth can better prevent oil leakage
Oil resistant and wear-resistant
Acid and alkali corrosion resistance
Waterproof and heat-resistant
Adopting TG4 external thread design, the internal three lip seal brings you a world without oil leakage
Various sizes and models meet your needs
Super large inventory spot quick delivery
3000 square meter super large warehouse with over 10000 specifications and models
External thread three lip upgraded version
Complete specifications
Support customization
| product name | Product Material |
| TG4 type skeleton oil seal | Fluororubber/FKM |
| Working pressure | Material hardness |
| 70 Shore pressure<0.05MPA line speed<15M/S | 70 Shaw Brothers |
| Working medium | working temperatur |
| Mineral oil, synthetic oil, water | - 25°C~240°C |
| Caliber | Inches | Outer diameter of the tube | Outer diameter of sealing ring | Sealing ring height |
| DN20 | 3/4 | 26.9 | 40 | 27 |
| DN25 | 1 | 33.7 | 47 | 27 |
| DN32 | 11/4 | 42.7 | 50.5 | 28 |
| DN40 | 11/2 | 45 | 59.5 | 28 |
| 48.3 | 62 | 27 | ||
| DN50 | 2 | 57 | 70 | 27 |
| 60.3 | 73 | 27 | ||
| DN65 | 21/2 | 73 | 85 | 28 |
| 76.1 | 93 | 25 | ||
| DN8O | 3 | 88.9 | 103 | 27 |
| DN100 | 4 | 102 | 120 | 29 |
| 108 | 122 | 30 | ||
| 114.3 | 134 | 29.5 | ||
| DN125 | 5 | 113 | 145.5 | 28.5 |
| 141 | 157 | 30 | ||
| DN150 | 6 | 159 | 177 | 28 |
| 168.3 | 187 | 29 | ||
| DN200 | 8 | 219 | 324 | 34 |
| DN250 | 10 | 273 | 300 | 33 |
| DN300 | 12 | 325 | 350 | 34 |
Q1: Do you have your own factories?
A: Yes, we have our own factories, set up over 12 years.
Q2: Doesn't it look like movie movies, why?
Answer: More expensive than most movie types, since it is a characteristic characteristics with a dolphin quality
The amount is relatively low and demands expensive
and complex primary manufacturing facilities.
Q3: What difference is "solidified" and "sulfurization"?
For joint movies.
Q4: Why use of ammonia for food applications?
Answer: Silicon is one of the many types of film that can be used for contacts with food.
The priority is low pollution non-toxic material.
Q5: Do you provide samples, free or free?
A: Yes, if we have cards, we can provide the same product free of charge and you need to pay
Traffic in your own country.
Q6: When can the goods be issued after I have ordered?
A: If there are cups, 2-5 days; If no, 15-30 days depend on the number
