Audited Supplier
Pure Nickel wire
Pure Nickel alloy
Round
Pure Nickel alloy
Customized
bare bright smooth
Cold Drawing
Customized
Customized
0.2-5.6mm
Yes
100kg
Liqun
Plywood Cases
5.6/3.2/2.5/2.0/1.38/1.13/0.5/0.8/0.2mm
China
7506100000
Product Description
Customized N4 N6 Pure Nickel Wire Ni201 Ni200
Nickel has high chemical stability and good corrosion resistance in many media. Its standard electrode position is -0.25V, which is positive than iron and negative than copper.Nickel exhibits good corrosion resistance in the absence of dissolved oxygen in dilute non-oxidized properties (e.g., HCU, H2SO4), especially in neutral and alkaline solutions.This is because nickel has the ability to passivate, forming a dense protective film on the surface, which prevents nickel from further oxidation.
Main application fields:
Chemical and chemical engineering, generator anti-wet corrosion components (water inlet heater and steam pipe), pollution control equipment (waste gas sulfur removal equipment), etc.
1.Chemical composition and mechanical properties
| Product | Chemical Composition/% | Density (g/cm3) | Melting point (ºC) | Resistivity (μΩ.cm) | Tensile Strength (Mpa) | ||||||||||||
| Ni+Co | Cu | Si | Mn | C | S | Fe | P | ||||||||||
| N4(Ni201) | >99 | <0.25 | <0.35 | <0.35 | <0.02 | <0.01 | <0.4 | 0.015 | 8.89 | 1435-1446 | 8.5 | ≥350 | |||||
| N6(Ni200) | ≥99.5 | <0.25 | <0.35 | <0.35 | <0.15 | <0.01 | <0.4 | - | 8.9 | 1435-1446 | 8.5 | ≥380 | |||||
Our production as per norm GBT26016-2010.For further information or special request, please contact us.
Q1.What is the nature of the company?
A: We are a production enterprise, our company has its own factory.
Q2. What is the MOQ of an order of your company?
A: Our company's MOQ is 100 kg for each type of product.
Q3.Can I get a sample before mass production ?
A: Sample is free,the shipping cost of the sample is paid by the customer .
Q4.How long is the mass production cycle of product?
A: We will end the production within 15-20 days after receiving the deposit.
Q5.What payment method does your company support?
A: We can accept T/T, L/C ,you can choose the one which the most convenient or most effective for you .
A: We are a production enterprise, our company has its own factory.
Q2. What is the MOQ of an order of your company?
A: Our company's MOQ is 100 kg for each type of product.
Q3.Can I get a sample before mass production ?
A: Sample is free,the shipping cost of the sample is paid by the customer .
Q4.How long is the mass production cycle of product?
A: We will end the production within 15-20 days after receiving the deposit.
Q5.What payment method does your company support?
A: We can accept T/T, L/C ,you can choose the one which the most convenient or most effective for you .
