Audited Supplier
4-6%
Lump
Si Ba
Low Carbon
Ba :4%-6%
0
0
Silicon Barium Inoculant
Steel Making
1 Kg
Gray
Cleaning
Lumps
Woven Bag Packaging
0.01(%)
1-3mm
More Than 72%
HJ
25kgs/Bag, 1mt Jumbo Bag
1-3mm
China
7202290090
Product Description
HuanJiang Manufacturer Furnace Charge Supply Sulfur Removal Si-Ba Inoculant 4-6% Ba Casting Barium Inoculant for Steelmaking
Product Description:
Product Description:
Si-Ba-Ca alloy is a kind of graphite can promote graphitization, reduce the tendency of white mouth, improve the morphology and distribution of graphite, increase the number of eutectic groups, refine the matrix structure, it has a good effect in a short time (about 5-8 minutes) after inoculation. Mainly suitable for various situations of general casting or late instantaneous inoculation. The amount of inoculant used in the inoculation treatment of cast iron has little effect on the chemical composition of cast iron, but great effect on its microstructure, so it can improve the mechanical properties of gray cast iron, and also has obvious effect on its physical properties. Good inoculation has the following effects: Eliminate or reduce the tendency of white mouth; To avoid the occurrence of supercooled tissue; Reduce the sensitivity of the wall thickness of cast iron, so that the difference of the microstructure of the thin and thick section of the casting is small, and the hardness difference is small. It is beneficial to nucleation of eutectic group and increase the number of eutectic group.
Silicon Barium Inoculant
Wuxi Huanjiang Furnace Charge Co. Ltd was established in 2000, located near the Beijing-Hangzhou Grand Canal with a long history in China. Mainly engaged in ferrosilica, fermanganese, rare earth magnesium silicon alloy, inoculant, recarburizer, slag removal agent, iron sulfide, deoxidizer, thermal insulation covering agent, iron phosphorus, silicon carbide and other dozens of alloy materials.
After more than 20 years of struggle, the company has established long-term cooperative relations with metallurgical, steelmaking and casting industries all over the country. We always adhere to the principle of honesty and mutual benefit. We welcome friends from all over the world to contact us for win-win and common development.
OUR PROMISE,YOUR QUALITY
Production Process
1,Raw materials are added in perfect order for producingmore Mg-Si and reducing the loss of Mg.
2,The thickness of our alloy ingot is under controlled within 10-15mm,if under 10mm,it will increase MgO.if above 15mm, it will reduce the uniformity of our alloy ingot.
3,We will clean the surface of ingot after alloy solidified.Oxide,impurity,and powder of the surface will beeliminated from the surface.
Quality Control
Quality Control
To ensure the best and stable quality,we check more than four times for one orderby spectrometer and chemical test,including raw materials,production,final products.
X-Ray Fluorescence Spectrometer
-Ray Fluorescence Spectrometer can radiate X-Ray according todifferent chemical elements,It can detect energy and wavelengthby different chemical elements.The software can transfer theminto data for all kinds of the chemical composition.
Features:
Immediate Analyze:quality test only takes 5 minutes.Physical analsis method that won't occur chemical reaction in the testing process.High precision&High sensibility Save time to make sample.Allow samples as solid,liquid,and powder shape.
Exhibition
Product package
Exhibition
Product packagi
FAQ
FAQ:
Q1: Are you a manufacture or trader?
A1: We are trader.
Q2: How are the products' quality?
A2: The products will be strictly inspected before shipment, so the quality could be guaranteed.
Q3: How to guarantee the quality?
A3: Our factory lab can supply the quality report ,and we can arrange third party inspection when cargo arriving loading port .
Q4: Can you supply the special size and packing?
A4:Yes, we can supply the size according to buyers'request.
Q5: What's the MOQ of trial order?
A5: No limit,We can offer the best suggestions and solutions according to your condition.
Q6: How long is delivery time?
A6: The delivery time will be determined according to the quantity of the order.
Q7: What are the payment terms?
A7: Usually T/T,but L/C are available for us.
Q8: Do you provide samples?
A8: Yes, samples are available.
Silicon Barium Inoculant
| ||||||||||||||||||||||
Wuxi Huanjiang Furnace Charge Co. Ltd was established in 2000, located near the Beijing-Hangzhou Grand Canal with a long history in China. Mainly engaged in ferrosilica, fermanganese, rare earth magnesium silicon alloy, inoculant, recarburizer, slag removal agent, iron sulfide, deoxidizer, thermal insulation covering agent, iron phosphorus, silicon carbide and other dozens of alloy materials.
After more than 20 years of struggle, the company has established long-term cooperative relations with metallurgical, steelmaking and casting industries all over the country. We always adhere to the principle of honesty and mutual benefit. We welcome friends from all over the world to contact us for win-win and common development.
OUR PROMISE,YOUR QUALITY
Production ProceQuality Control for Our Melting Process
Production Process
1,Raw materials are added in perfect order for producingmore Mg-Si and reducing the loss of Mg.
2,The thickness of our alloy ingot is under controlled within 10-15mm,if under 10mm,it will increase MgO.if above 15mm, it will reduce the uniformity of our alloy ingot.
3,We will clean the surface of ingot after alloy solidified.Oxide,impurity,and powder of the surface will beeliminated from the surface.
Quality Control
Quality Control
To ensure the best and stable quality,we check more than four times for one orderby spectrometer and chemical test,including raw materials,production,final products.
X-Ray Fluorescence Spectrometer
-Ray Fluorescence Spectrometer can radiate X-Ray according todifferent chemical elements,It can detect energy and wavelengthby different chemical elements.The software can transfer theminto data for all kinds of the chemical composition.
Features:
Immediate Analyze:quality test only takes 5 minutes.Physical analsis method that won't occur chemical reaction in the testing process.High precision&High sensibility Save time to make sample.Allow samples as solid,liquid,and powder shape.
Exhibition
Product package
Exhibition
Product packagi
FAQ
FAQ:
Q1: Are you a manufacture or trader?
A1: We are trader.
Q2: How are the products' quality?
A2: The products will be strictly inspected before shipment, so the quality could be guaranteed.
Q3: How to guarantee the quality?
A3: Our factory lab can supply the quality report ,and we can arrange third party inspection when cargo arriving loading port .
Q4: Can you supply the special size and packing?
A4:Yes, we can supply the size according to buyers'request.
Q5: What's the MOQ of trial order?
A5: No limit,We can offer the best suggestions and solutions according to your condition.
Q6: How long is delivery time?
A6: The delivery time will be determined according to the quantity of the order.
Q7: What are the payment terms?
A7: Usually T/T,but L/C are available for us.
Q8: Do you provide samples?
A8: Yes, samples are available.
