Manufacturer Wholesale Blue Pet Anti-Static Release Film Polyester Plastic Film 50u 180-250g

Product composition
This dual-silicon single anti-release film is based on blue PET (polyester film), coated with ultra-light organic silicone oil on both sides for anti-static treatment on one side, with a surface resistivity of 10 ^ 6~10 ^ 10 Ω. m.
Product characteristics
1. The coating is uniform, and the floating change of the double-sided release force is small;
2. High cleanliness for production and processing in a thousand-class purification environment;
3. The surface resistivity reaches 10 ^ 6~10 ^ 10 Ω. m, with stable anti-static interference effect;
4. The appearance is free of scratches, good flatness, coating lines, wrinkles, dirt and crystal spots;
5. High residual adhesion rate (≥ 90%), little silicon transfer, no impact on the performance of the bonding material, no pollution;
Product specification
1. Width: 1060mm (can be customized according to customer requirements)
2. Length: 200-2000m (slitting and rewinding according to customer requirements)
3. Inner diameter of coil core (paper tube or plastic tube): 3 inches (76.2 mm) or 6 inches (152.4 mm)
Scope of application
This double-sided release and single-sided anti-static blue PET ultra-light release film (also known as dual-silicon single-sided anti-static ultra-light release film in the market) is suitable for the application in some special fields of die-cutting and stamping.


Product packaging
1. Products are generally packed in cartons and wooden pallets
2. Each box of products has a shipping label, and each pallet has a product list
3. It can also be packaged according to the customer agreement

instructions
1. Static electricity may be generated during unwinding or rewinding during use. The electrostatic layer will damage the release layer and lead to poor peeling. If necessary, anti-static treatment can be carried out on the back or static elimination equipment can be used to eliminate static electricity.
2. In order to obtain the best use effect, it is recommended to use this product within 6 months from the purchase date;
3. It must be retested before use after expiration;
4. Recommended storage conditions: avoid direct sunlight, store under the indoor ambient temperature of 25 ºC ± 2 ºC and humidity of 60% ± 10%.
5. When using this product, please fully study whether the purpose (purpose, condition) is suitable or not in advance, and decide whether the product conforms to its standard by yourself. The content beyond the specification cannot be guaranteed.