Audited Supplier
We can design and produce the highest quality hydraulic cylinders. Single acting, double acting hydraulic cylinder. Large and small size hydraulic cylinders.3-6 telescopic hydraulic cylinders.
(1) Construction machinery cylinders are used in: loaders, excavators, forklifts, bulldozers, dump trucks, road rollers, cranes, pump trucks, garbage trucks, garbage compacting machines and Marine hydraulic cylinders.
(2) Metallurgical machinery cylinders are used for: reducer, tile press, etc.
(3) Mining machinery cylinder: crusher, coal cutter shield machine, tunnel boring machine, gate, etc.
(4) Agricultural and forestry machinery cylinder is used for: ground preparation machine, harvester, weeder and so on.
We are a premier manufacturer of Hydraulic & Pneumatic equipment, with over 25 years of experience in crafting customized cylinders and systems for clients across diverse industries, including:
- Steel Manufacturing
- Hydropower Engineering
- Mining, Marine, Agriculture
- Civil Construction
As an authorized supplier for numerous Chinese state-owned corporations, we pride ourselves on delivering unparalleled quality. While our products may not always be the cheapest option on the market, our commitment to quality is unmatched!
Product Specifications:
| Product Name | Hydraulic / Pneumatic Cylinders |
| Operating Pressure | 7/14/16/21/31/35/63Mpa, Customized |
| Operation Temperature | -20°~50° |
| Material | Cast Iron, C45 Steel, Stainless Steel, Aluminum |
| Bore Diameter | 8mm - 1000mm |
| Rod Diameter | 4mm - 900mm |
| Stroke | 16mm - 8000mm |
| Mounting Type | Flange, Eye, Tie Rod, Pin, Foot |
| Color | Custom Colour |
| Certification | ISO 9001 |
We have a wide range of advanced manufacturing equipment, including
- All kinds of CNC lathes
- Milling Machines
- Boring Machines
- Slotting Machines
- Sawing Machines
- Quality Inspection Equipment
- Valve Testing System
- Automatic Welding Machine
- Sandblaster
We maintain strict supplier control:
1. All suppliers have to provide quality certificate
2. All materials must have test / source reports
3. Only use genuine seals, e.g., Parker, Merkel, Hallite
1 We have a professional quality control department, every step from raw materials to finished products is in the same factory, and every procedure will be tested by professional inspectors.
2 Each spare part will be measured and cleaned prior to assembly of the hydraulic cylinder. After the hydraulic cylinder is assembled, the pressure test will be carried out one by one. During the nearly one-hour test, we ensured that the test pressure was 30%-50% higher than the rated pressure. Each hydraulic cylinder must be tested without any leakage.
Packing and Shipping
Minimum order quantity: 1PC
Packing: Just in case
Terms of delivery: 1. by sea; 2. Air transport; 3. Express to the door,
Payment method: D/P L/C D/A T/T
A: We are Hydraulic & Pneumatic equipment manufacturer based in Wuhan, China.We are a subsidiary of Wuhan Hongda Hydraulic Co., Ltd., established in 2024. As an important member of Hongda, Feiyang Technology is dedicated to promoting the development of Hongda Hydraulic in overseas markets through innovative technology, high-quality products, and excellent services
Q: 2. Do you accept OEM? What is your minimum order quantity? Do you have OEM experience?
A: We accept OEM for every product that we produce, there is no MOQ for any of our product if you wanted a OEM, We've been doing OEM ever since the year we established our factory, which is 1999. We have a mature technical team ready to discuss your unique requirements with you.
Q: 3.ls your delivery always on time?
A: We can't promise about the freight but what we can do is shortening our lead time while keep the same quality level. Therefore, it will not be any problem even if the sea freight delay for a couple days.
Q: 4. Why don't you have CE certification?
A: CE certification is for one product, not the whole factory, and we have way too many product lines to registered CE for, but our customers from Europe said it's easy to solve the CE problem. And we are working on the CE certifications registration process, in order to save our customers' time in the future. By the way, there are many products with fake CE Certification on the market, please be aware with that to avoid unnecessary problems.
Q: 5. How do l start to order?
A: First, talk to our sales about your machine model, working conditions, technical requirements, deadlines. Then, our sales will provide the details you need. All inquiry will be responded within 24 Hours.
Q: 6. Can you tell me the latest situation of order production process?
A: Of course, unlike others who might hide their production process, our production process is totally open for our customers. Feel free to inform our sales about your needs.
