Audited Supplier
3.5inch
Small-sized LCM, Monitor LCM, Notebook LCM, Vr/Ar
C/M/T
Capacitive
LCM
6ms
IPS
TFT
Row/Column-Driven Control Type
Multiplex Drive LCD Module
Customized
480 CD/M2
-40 to +70 ºC
-10 to +55 ºC
Active Matrix TFT
jinzhaohui
Carton
Glass electronic products of 2.1" display
China
8528591090
Product Description
Introduction
The 3.5inch TFT-LCD Module is a Color Active Matrix TFT LCD panel using LTPS (Low Temperature Poly-silicon) TFT's (Thin Film Transistors) as an active switching devices. This module has a 3.5 inch diagonally measured active area with 1440*1600 resolutions (1440 horizontal by 1600 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 16.7M colors. The TFT-LCD panel used for this module is adapted for a low reflection and higher color type.
Features
High PPI
Fast response time
High frame ratio
High luminance, low reflection and wide viewing angle
RoHS,Halogen Free Compliant
Application
Virtual Reality Device
Augmented Reality Device
General Specification
Note 1: If the module exceeds the absolute maximum ratings, it may be damaged permanently.
LCD Active Area | 59.4(H) × 66.0(V) mm |
Screen size | 3.5 (88.79mm) inch diagonally |
Number of pixels | 1440(H) × 1600(V) pixels 615 ppi |
Pixel pitch | 13.75(H) × 41.25(V) um |
Pixel arrangement | RGB stripe |
Display colors | 16.7M colors |
Interface | MIPI DSI (Video Mode) |
LCM Outline Dimension | 62.2(H) × 73.6(V) × 1.7 (T) mm |
Absolute Maximum Ratings
Items | Symbol | Rating |
Logic voltage | VDDI | -0.3 to +1.8 V |
Positive Analog Power Supply Voltage | AVDD | -0.3 to +5.7 V |
Negative Analog Power Supply Voltage | AVEE | - -5.7 to +0.3 V |
LED forward current | ILED | 50 mA each LED 10% on duty |
Humidity (ambient temeprature=Ta) | Ta≤55ºC, 90% RH Max. |
Note 1: If the module exceeds the absolute maximum ratings, it may be damaged permanently.
Also, if the module operated with the absolute maximum ratings for a long time, its reliability may
drop. It is not allowed for any of these ratings to be exceeded. Make sure all the design characte
ristics are adequate before the panel is initialed.
Note 2: Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39 ºC max. and no condensation of water.
