Audited Supplier
Maraging Steel 250 / C250 (AMS 6512 / BS S162)
Type C250 cobalt containing grade of maraging steel, produced by vacuum arc re-melting, provides very high strength (nominally 250 ksi tensile) with an above average level of toughness. The alloy retains its strength up to 450°C and good notch impact is maintained down to minus 50°C and below. This material may be nitrided. C250 is usually supplied in the annealed condition where the microstructure consists of fine martensite. This structure is then maraged (precipitation hardened) to achieve final properties employing a relatively low temperature that results in the required combination of high strength and toughness. The alloy has a density of 8.02 g/cc.
Chemical composition% of C250 C300 C350 Alloy
| Weight% | Ni | Co | Mn | Si | C | Al | Mo | S | P | Ti | Fe | Zr |
| Maraging C250 | 17.0-19.0 | 7.0-8.5 | 0.10 max | 0.10 max | 0.03 max | 0.05-0.15 | 4.6-5.2 | 0.010 max | 0.010 max | 0.3 - 0.5 | Bal | - |
| Maraging C300 | 18.0-19.0 | 8.0-9.5 | 0.10 max | 0.10 max | 0.03 max | 0.05-0.15 | 4.6-5.2 | 0.010 max | 0.010 max | 0.55-0.80 | Bal | - |
| Maraging C350 | 18.50 | 12.0 | 0.10 max | 0.10 max | 0.03 max | 0.10 | 4.8 | 0.010max | 0.010 max | 1.4 | - | 0.01 |
Typical Mechanical Properties
| Material | Condition | Ultimate Tensile (min) | Yield Strength (Min) | Elongation in 4D % (min) | Hardness | ||
| Mpa | Ksi | Mpa | Ksi | ||||
| Alloy Maraging C250 | After Maraging heat treatment 900°F | 1758 | 255 | 1724 | 250 | 6 | ≥ 48 HRC |
Product Sales Information:
Material | c350 c250 c300 steel round bar |
Size | Diameter:20mm-1000mm Length:500mm-6000mm |
Origin place | Made In China |
Delivery Condition | Hot rolled,cold drawn,forged |
Surface require | Black,grinding,bright,polish |
Heat treatment | Quenched,Tempered,annealed |
Packing | seaworthy packing ,wooden case ,carton,woven bag or at client's requires |
Delivery time | In 10-50 days |
Trade Term | EXW,FOB,CIF |
Payments | T/T or L/C at sight |
Port | China main Port,such as shanghai,Dalian,Shenzhen port. |
MOQ | 1 Ton |
Typical Applications:
1.Missile casings
2.Tooling
3.Ordnance mounting blocks
4.High performance autosport components,
5.Couplings
6.Jet engine and helicopter drive shafts
7.Load cells
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according toquantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.lf you have another question, pls feel free to contact us.
