Audited Supplier
Marine jotun pure Epoxy Primer paint
This is a two-component moisture-curable inorganic zinc silicate coating. It has good corrosion resistance and can be used in conjunction with other coatings. Use as primer in atmospheric environments. For use only on properly prepared carbon steel substrates. The powder in this product complies with ASTM D520, Type II.
Suitable for steel structures and pipelines in corrosive environments. Recommended for use in offshore environments such as refineries, power stations, bridges, construction and mining equipment. Designed specifically for use as a primer in paint systems where durability is required.
Purpose: Specially designed to improve the flowability of a series of Jordan acrylic, ethylene, and anti fouling coatings, and can also be used as a cleaning agent for pumps and tools before and after painting;
Content of components: light aromatic solvent (petroleum) 65%, xylene 15%, 1-Butanol 15%, ethylbenzene 5%;
Classification of metal coatings: Epoxy resin coatings.
Function: Improve the fluidity of Jotun epoxy paint.
Is it a hazardous chemical: No
Type of solvent: Oil-based paint
| Physical state | Liquid. |
| Color | Brown., Black, Blue., Clear., Green., Grey, MCI Base 1, MCI Base 2, MCI Base 3, MCI Base 5, MCI Base 6, Off-white., Orange, Pink, Red, White., Yellow. |
| Odour | Characteristic. |
Odour threshold | Not applicable. |
Melting point/freezing point | Not applicable. |
Initial boiling point and boiling range | Lowest known value: 126°C (258.8°F) . Weighted average: 140.89°C (285.6°F) |
Flammability | Not applicable. |
Upper/lower flammability or explosive limits | 0.8 - 7.6% |
Flash point | Closed cup: 27°C (80.6°F) |
Auto-ignition temperature | Lowest known value: 280 to 470°C (536 to 878°F) (hydrocarbons, C9, aromatics). |
Decomposition temperature | Not applicable. |
pH | Not applicable. |
Viscosity | Kinematic (40°C): >20.5 mm2 /s |
Solubility(ies) | |
| Media | Neither solubled in the cold water and hot water |
Partition coefficient: n-octanol/ water | Not available. |
Vapour pressure | Highest known value: 1.5 kPa (11.3 mm Hg) (at 20°C) . Weighted average: 0.9 kPa (6.75 mm Hg) (at 20°C) |
Evaporation rate | Highest known value: 1 Weighted average: 0.8compared with butyl acetate |
Density | 1.266 to 1.513 g/cm³ |
Vapour density | Highest known value: 4 (Air = 1). Weighted average: 3.71 (Air = 1) |
Explosive properties | Not available. |
Oxidising properties | Not available. |
Particle characteristics Median particle size | Not applicable. |
1. Our Shipyard: Ningbo Zhenhe shipyard, and now Taihang is the branch representative of our yard.
2. Our founding team has experience of more than 15 years in shipbuilding and ship repair with our own engineer and designer.
3. Equipment quality guarantee: Based on shipyard feedback, we built up a manufacturer file to ensure the good quality of the products. Also, we can send our engineers to help our clients install and test these exported equipment.
4. We are a second-hand ship broker to help you find the satisfied used different kinds of vessels.
5. We are able to provide the CKD kits and one-stop service based on our laser-cutting machine and purchase ability
6. We have a very professional design and technical team to work out perfect plans for our clients and help to solve any matters with pre-sale and after-sale.
7. Customer Distribution: Tanzania, Rwanda, India(Mumbai and Kolkata), Suva, Portugal, Russia, Netherlands, Iceland, Denmark, Malaysia, Mexico.......
