Audited Supplier
SF-1005
PP
Industry, Food and Beverage, Medicine, Textile, Metallurgy
PP Filter
Flat Connector
Medium Filter
PP Material
5''/10''/20''/30''/40''/50''
62mm/63mm/65mm/115mm
28mm,30mm
1,5,10,20,30,50,70,100micron
Martin
Carton
SGS
Shanghai, China
842199
Product Description
Martin PP Sediment Filter Cartridge with 5 Micron
MELT BLOWN FILTER CARTRIDGES
Martin melt blown filter cartridges are self-bonded and structured with three different fibers, inside thin and outside thick, which better purifies water, increases the filter impurity capacity, prolongs its service life and thus lowers the cost.
FEATURES
1. 100% pure polypropylene construction
2. Wide chemical compatibility
3. No lubricants or anti-static additives
4. Higher dirt holding capacity
5. Consistent filtration over the life of the cart ridges
6. Low pressure drop
APPLICATIONS
1. Residential and commercial water treatment
2. Fine chemical, reagents, solvents, resins
3. Coatings
4. Edible oils
5. Liquors, juices, sugars
6. Make-up water
SPECIFICATIONS
1. Outside Diameter: 62mm, 63mm, 65mm, 115mm
2. Inner Diameter: 28mm, 30mm
3. Length: 5", 10", 20", 30", 40", 50"
4. Micron rating (nominal ) : 1, 5,10, 20, 30, 50, 70, 100micron
5. Filter Media: polypropylene
6. Maximum operating temperature Rating: 52°C
MELT BLOWN FILTER CARTRIDGES
Martin melt blown filter cartridges are self-bonded and structured with three different fibers, inside thin and outside thick, which better purifies water, increases the filter impurity capacity, prolongs its service life and thus lowers the cost.
FEATURES
1. 100% pure polypropylene construction
2. Wide chemical compatibility
3. No lubricants or anti-static additives
4. Higher dirt holding capacity
5. Consistent filtration over the life of the cart ridges
6. Low pressure drop
APPLICATIONS
1. Residential and commercial water treatment
2. Fine chemical, reagents, solvents, resins
3. Coatings
4. Edible oils
5. Liquors, juices, sugars
6. Make-up water
SPECIFICATIONS
1. Outside Diameter: 62mm, 63mm, 65mm, 115mm
2. Inner Diameter: 28mm, 30mm
3. Length: 5", 10", 20", 30", 40", 50"
4. Micron rating (nominal ) : 1, 5,10, 20, 30, 50, 70, 100micron
5. Filter Media: polypropylene
6. Maximum operating temperature Rating: 52°C
