Product Overview

Multi-effect distilled water machine adopts a process of chemical and microbial purification of raw water by gas-liquid phase method and separation method. In this process, the water is evaporated, the steam is removed from the water, and the unevaporated water that flows back dissolves solids, non-volatile substances, and polymer impurities. In the process of evaporation, low molecular impurities may be carried in the form of water mist or water droplets in the steam evaporated by water, so a separation device is needed to remove fine water mist and entrained impurities. This includes endotoxin. The purified steam is condensed into water for injection, and the content of endotoxin can be reduced by distillation at least 99.99%;
FEATURES AT A GLANCE
The water quality meets the requirements of the Chinese pharmacopoeia standards and FDA: fully automatic operation of the equipment and fully automatic processing procedures with conditions (e.g. backwash, regeneration, pickling, disinfection procedures); monomer and piping equipment meet the GMP requirements (e.g. back-end treatment equipment sterilizer, membrane filter, terminal water tank, pipeline all using 316 L materials, pretreatment equipment pipeline using SUS304 materials).
--Purified water quality standard: conductivity ≤0.5μs/cm;TOC≤200 ppb; microbial ≤10 cfu/ml;
--The surface of the parts is treated with chrome plating, rust-proof and corrosion-resistant;
--Purified water systems can be configured RO systems or EDI systems;
--The purified water system can be equipped with partial concentrated water recovery device, and the overall recovery rate of the system is more than 80%;


- All equipment is made of 316 L stainless steel, the working surface is pickled and passivated;
Capacity: 120-5000 L/h
- Water for injection standard: conductivity ≤0.5μs/cm;TOC≤200 ppb; microbial ≤ within 10 cfu/100ml; toxicity 0.25 EU/ml;
- Reliable operation of equipment, stable water quality;
- With special atomizing nozzle , the raw water is atomized and evenly distributed, and the raw water is continuously and efficiently removed before the falling film evaporates;
- The specially designed distillation column adopts the new expansion connection technology, guarantees the stainless steel composition, fully guarantees the equipment to run stably for a long time;
- Multi-stage separation method to obtain high-quality injection water;
- PW/WFI modular design, compact structure, easy operation and maintenance;
- Can be customized multi-cycle, circulating pump frequency conversion operation, system process design and operation in accordance with the GMP and ISPE guidelines;
- Distribution pump chamber discharge valve without dead angle;
- Automatic control storage distribution system on-line cleaning and disinfection;
- Hot water / ozone disinfection for purified water distribution
Super hot water / pure steam disinfection for injection water distribution
- Design and construction of integrated solutions such as purified water, injection water, pure steam, compressed air and nitrogen , meet the needs of pharmaceutical enterprises;
- The control system can be equipped with automatic production of electronic reports and electronic records, with audit tracking, intelligent maintenance, remote troubleshooting and other functions;