Audited Supplier
| model | diameter | Total length | Knife bar length | Handle length | Handle frame | Weight in grams | Packing |
| 3-inch cross/one letter | 3mm | 167mm | 75mm | 92mm | 28mm | 47g | 300 pieces |
| 3-inch cross/one letter | 5mm | 167mm | 75mm | 92mm | 28mm | 53g | 80pieces |
| 4-inch cross/one letter | 5mm | 192mm | 100mm | 92mm | 28mm | 56g | 80pieces |
| 5-inch cross/one letter | 5mm | 217mm | 125mm | 92mm | 28mm | 60g | 80pieces |
| 6-inch cross/one letter | 5mm | 242mm | 150mm | 92mm | 28mm | 65g | 80pieces |
| 4-inch cross/one letter | 6mm | 202mm | 100mm | 102mm | 28mm | 74g | 60pieces |
| 5-inch cross/one letter | 6mm | 227mm | 125mm | 102mm | 28mm | 79g | 60pieces |
| 6-inch cross/one letter | 6mm | 252mm | 150mm | 102mm | 28mm | 80g | 60pieces |
| 8-inch cross/one letter | 6mm | 302mm | 200mm | 102mm | 28mm | 99g | 60pieces |
| 10-inch cross/one letter | 6mm | 352mm | 250mm | 102mm | 28mm | 108g | 60pieces |
| 12-inch cross/one letter | 6mm | 402mm | 300mm | 102mm | 28mm | 111g | 60pieces |
| The above data is manually measured. If there is any error, the actual measurement shall prevail. | |||||||
Cross screwdriver and straight screwdriver are two common types of screwdrivers, with significant differences in shape and usage.
Firstly, the head of a Phillips screwdriver is in a cross shape, while the head of a Phillips screwdriver is in a straight shape. This shape design allows the cross screwdriver to better accommodate cross shaped screw heads, while the straight screwdriver can better accommodate straight shaped screw heads. Therefore, when choosing a screwdriver, it is necessary to select the corresponding tool based on the shape of the screw head.
Secondly, there are different methods for using a Phillips screwdriver and a Phillips screwdriver. When using a Phillips screwdriver, it is necessary to align its head with the cross shaped screw head and then rotate it forcefully until the screw is tightened or loosened. When using a straight screwdriver, it is necessary to align its head with the straight shape of the screw head and then rotate it vigorously until the screw is tightened or loosened. During use, it is important to pay attention to the direction and force of rotation to avoid damaging screws or tools.
In summary, although both Phillips screwdrivers and Phillips screwdrivers are common screwdriver tools, there are significant differences in their shapes and usage methods. Therefore, when selecting and using, it is necessary to choose the corresponding tool according to the shape and usage requirements of the screw head.
