Audited Supplier
0.500 Kg
Drone Accessories
Speed Controllers
Composite Material
Flight Controller
Electricity
10000 Ml
168MHz Stm32f405rgt6
Icm42688-P (Spi)
Spl06-001 (I2c)
At7456e (Spi)
GZIVEY
Carton
10X10X5 cm
China
Product Description
Guangzhou Ivey Electronics Co., Ltd
Product Description
* MCU: 168MHz STM32F405RGT6* IMU: ICM42688-P (SPI)
* Baro: SPL06-001 (I2C)
* OSD: AT7456E (SPI)
* Blackbox: MicroSD slot (SPI)
* 6x UARTs, 1x Softserial_Tx option(INAV/BF)
* 11x PWM outputs (8x Dshot compatible with BF/ArduPilot)
* 1x I2C
* 4x ADC (VBAT, Current, RSSI, Airspeed)
* 1x spare PINIO
* 4x individual ESC power/signal pads
* 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
* Built in inverter on UART2-RX for SBUS input
* Switchable Dual Camera Input
PDB Specifications
* Input: 9~36V (3~8S LiPo)
* PDB: 4x 35A (Max.4x 50A)
* BEC: 5V 1.5A
* BEC: 12V 2A
* LDO 3.3V: 200mA
* Current Senor: 220A, 3.3V ADC (INAV/BF scale 150, ArduPilot 66.7 A/V)
* Battery Voltage divider 1K:20K (INAV scale 2100, BF scale 210, ArduPilot BATT_VOLT_MULT 21.0)
* Input: 9~36V (3~8S LiPo)
* PDB: 4x 35A (Max.4x 50A)
* BEC: 5V 1.5A
* BEC: 12V 2A
* LDO 3.3V: 200mA
* Current Senor: 220A, 3.3V ADC (INAV/BF scale 150, ArduPilot 66.7 A/V)
* Battery Voltage divider 1K:20K (INAV scale 2100, BF scale 210, ArduPilot BATT_VOLT_MULT 21.0)
Firmware
* ArduPilot: MatekF405-TE
* INAV: MATEKF405TE_SD
* BetaFlight: MATEKF405TE
* ArduPilot: MatekF405-TE
* INAV: MATEKF405TE_SD
* BetaFlight: MATEKF405TE
Physical
* Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
* Dimensions: 36 x 46 mm
* Weight: 10g
Including
* 1x F405-TE
* 6x silicon grommets M4 to M3
* 1x Rubycon ZLH 35V/470uF (Low ESR)
* Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
* Dimensions: 36 x 46 mm
* Weight: 10g
Including
* 1x F405-TE
* 6x silicon grommets M4 to M3
* 1x Rubycon ZLH 35V/470uF (Low ESR)
Specification
* MCU: 168MHz STM32F405RGT6 | |
* IMU: ICM42688-P (SPI) | |
* Baro: SPL06-001 (I2C) | |
* Blackbox: MicroSD slot (SPI) | |
* 11x PWM outputs (8x Dshot compatible with BF/ArduPilot) | |
* 6x UARTs, 1x Softserial_Tx option(INAV/BF) | |
* 1x I2C | |
* 4x ADC (VBAT, Current, RSSI, Airspeed) | |
* 1x spare PINIO |
