Audited Supplier
Material 410SS High Quality Choke Bean lined with tungsten carbide for wellhead equipment.
---> Choke bean is often used in the positive choke valve for controlling the flow, Aseeder choke bean is same as Cameron type H2 big john choke bean, body Material: 410SS, lined with Tungsten Carbide (C10 or C25) , to protect them from corrosive and abrasive wear.
---> On one side of the choke manifold, calibrated choke beans are used to control flow rate through the fixed choke box. Each bean is a specific diameter, usually in graduations of 1/64-132 inch, Depending on the type of equipment used, the size of the choke bean can be as large as 3 inches.
---> QPQ treatment on the body of choke bean, to enhance the surface hardness
Product Parameters:
| TYPE | Dimension (mm) | Material Recommended | |||||
| D | d1 | d | L | α° | |||
| Valve Core | 52-80 | 40-70 | 10-40 | 75-120 | 10-45 | Tungsten+Cobalt | |
| TYPE | Dimension (mm) | Material Recommended | |||||
| D | d | L | |||||
| Valve Seat | 75-100 | 55-70 | 20-80 | Tungsten+Cobalt | |||
Choke stem and seat are the key parts for ajustable choke valves in wellhead equipment . Assembled with tungsten carbide tips and SS410 body .
1. Size : Usually according to customer's requirement
2. High precision
3. ISO
Tungsten Carbide Materials Grade As Below:
| Aseeder Grade | Co (Wt %) | Density (g/cm3) | Hardness (HRA) | TRS (≥N/mm²) |
| ZY11-C | 9.0-11.0 | 14.33-14.53 | 88.6-90.2 | 2800 |
| ZY15-C | 15.5-16.0 | 13.84-14.04 | 85.6-87.2 | 2800 |
| ZY15X | 14.7-15.3 | 13.85-14.15 | ≥89 | 3000 |
| ZY20 | 18.7-19.1 | 13.55-13.75 | ≥83.8 | 2800 |
| ZY06X | 5.5-6.5 | 14.80-15.05 | 91.5-93.5 | 2800 |
| ZY08 | 7.5-8.5 | 14.65-14.85 | ≥89.5 | 2500 |
| ZY09 | 8.5-9.5 | 14.50-14.70 | ≥89 | 2800 |
| ZY10X | 9.5-10.5 | 14.30-14.60 | 90.5-92.5 | 3000 |
32,000 Square Meters Factory:
Machining Facilities:
Seed Team:
