Audited Supplier
Overview:
This machine is used for the detection of the material conveyed by the tape conveyor, and can signal the loaded operation. If there is a water sprinkler connected, it can realize the function of automatic water sprinkling on the material. lt can also be applied to the tape machine running in opposite direction.
Working principle:
Type B:The detection device adopts load type detection, when there is material on the tape, the belt has a corresponding sink value due to the weight of the material, when the belt sinks, the top roller of the detector is pressed down, driving the internal sensing parts to move to make the proximity switch work and give a switch value to realize its detection. The detector is installed under the upstream tape, choosing the place where the sinkage of the tape is high when there is material. It is best to install it between two rollers, not near the outlet. When there is no material, the contact wheel should be just in contact with the tape.
Installation and use:
Adopt the door type bracket mounting frame, fix the monitor on the beam, the height of the chain ball depends on the site, the switch conversion angle of this device is 20°, the installation angle can be adjusted appropriately for the tape machine with inclination angle, you can choose the broom type or chain type.
Technical indicators :
| ltem | Parameters |
| Model | Material Flow Detectors |
| Ambient temperature | -30ºC-+75ºC |
| Relative humidity | ≥85% |
| Action Angle | 20° (two way) |
| Number of contacts | 1NO 1NC |
| Contact Capacity | AC380V 5A |
Zhejiang Weikesen Power Technology Co., Ltd. was established 15 years ago with a capital of 1 million euros. Is a professional sales of AC contactor, pull wire switch product design concept is based on market demand manufacturing products. The products have been loved by various industries throughout the country Through our continuous improvement of good quality and good market honor, we have won the unanimous praise of the market and a large number of foreign importers' favor and recognition.
Q1: Would you accept OEM/ODM ?
A1: Yes,we accept.OEM/ODM has a MOQ requirement.
Q2: Can we get samples ?
A2: Yes,you can get sample to test quality,but the freight for express is on buyer's account.
Q3: What's the payment term ?
A3:T, Western Union, MoneyGram,Paypal etc.
Q4: How's the delivery time ?
A4: Normally is 3-10 work days, lf the quantity is large,We need to negotiate.
Q5: What is the standard of package ?
A5:Normally are cartons, but also we can pack it according to requirement.
Q6: Could you offer Form E, C/O etc ?
A6: Sure, We can apply to CCPIT.
Q7: Are you a trading company or a manufacture ?
A7:We are the manufacturer& exporter in the industry so we can supply product for you with factory price.
