Audited Supplier
Microfiltration Machine
Physical Treatment
Industrial
0.8 Square Meter Per Plate
PVDF
0.1um
1020*510*14mm
ABS
RisingSun
Pallet
China
84219990
Product Description
Membrane bioreactor (MBR) is the combination of a membrane process like microfiltration or ultrafiltration with a biological wastewater treatment process and the activated sludge process. It is now widely used for municipal and industrial wastewater treatment. This bioreactor possesses the advantages of membrane filtration and biological treatment technology. Membrane modules, which can replace the secondary sedimentation tank, are used to separate mud and water. The MBR process has obvious advantages compared with the traditional wastewater treatment technology.
In a word, MBR technology including below two parts:
1. Biological reactor
2. Solids separation by membrane filtration
RisingSun flat sheet membrane is made of PVDF material, which has better chemical stability, fouling resistance and mechanical strength. With advanced membrane fabrication technology, we control the membrane pore size around 0.1 um to get a higher water flux and water quality.
MBR membrane elements with 0.1um PVDF membrane/ 0.8M2 for Membrane Bioreactor (MBR) process /domestic and industrial wastewater Treatment
Benefits:
The mortise and tenon structure is used in the support plate to get a more stable spacing without side panels. The support plate can be installed from top or one side without the limits of the construction site conditions.
SUN® PVDF membrane electron micrograph
Flat sheet MBR element
MBR membrane plate specifications:
Note: For different water quality, there will be a different water flow rate. So the user should fully test the membrane module. This parameter is tested at 25 ºC , -10KPa suction vacuum conditions based on municipal wastewater.
MBR complated module picture:
Cross refer: Kubota membrane, Toray membrane.
FAQ
1, Q: Are you manufacturer?
A:Yes, definitely,our factory locate in Beijing,China.
2, Q:What's your main products ?
A: we manufactur filter membranes, RO, NF, UF, MF membrane, spiral wound/flat sheet membrane, tubular membrane, MBR, DTRO,STRO,E-coat UF membrane, anode cell etc.
3, Q: what's your main market?
A:There're about 94 countries we've been exported, mainly in USA, Korea, UK, France, Russia, Germany, India, Spain, Brazil etc.
4, Q:Can you supply free sample?
A:Yes, we can supply free samples which are in stock, and the freight charge should be on your side.
5, Q: What about the package?
A:The membrane elements are wrapped with plastic bubble paper, then carton box, safe wooden box outise, the breakage is less than 1%.
6, Q: Do you offer OEM?
A: Sure!
In a word, MBR technology including below two parts:
1. Biological reactor
2. Solids separation by membrane filtration
RisingSun flat sheet membrane is made of PVDF material, which has better chemical stability, fouling resistance and mechanical strength. With advanced membrane fabrication technology, we control the membrane pore size around 0.1 um to get a higher water flux and water quality.
MBR membrane elements with 0.1um PVDF membrane/ 0.8M2 for Membrane Bioreactor (MBR) process /domestic and industrial wastewater Treatment
Benefits:
The mortise and tenon structure is used in the support plate to get a more stable spacing without side panels. The support plate can be installed from top or one side without the limits of the construction site conditions.
SUN® support plate
SUN® PVDF membrane electron micrograph
Flat sheet MBR element
MBR membrane plate specifications:
| Items | Standard type |
| Model | FMBR80 |
| Size (L×W×T) (mm) | 1020×510×14 |
| Membrane effective area (m2) | 0.8 |
| Weight (kg) | 1.5 |
| Permeate flux[l /( pc·d )] | 320-550 |
| Membrane material | PVDF |
| Membrane pore size(μm) | 0.1 |
| Plate material | ABS |
| Air flow rate[l /( min·pc )] | ≥ 10 |
| pH | 3-12 |
| Output turbidity (NTU) | < 1.0 |
| Output SS (mg/l) | ≤ 5.0 |
| Chemical cleaning | ~ 5,000mg/l NaClO |
MBR complated module picture:
Cross refer: Kubota membrane, Toray membrane.
FAQ
1, Q: Are you manufacturer?
A:Yes, definitely,our factory locate in Beijing,China.
2, Q:What's your main products ?
A: we manufactur filter membranes, RO, NF, UF, MF membrane, spiral wound/flat sheet membrane, tubular membrane, MBR, DTRO,STRO,E-coat UF membrane, anode cell etc.
3, Q: what's your main market?
A:There're about 94 countries we've been exported, mainly in USA, Korea, UK, France, Russia, Germany, India, Spain, Brazil etc.
4, Q:Can you supply free sample?
A:Yes, we can supply free samples which are in stock, and the freight charge should be on your side.
5, Q: What about the package?
A:The membrane elements are wrapped with plastic bubble paper, then carton box, safe wooden box outise, the breakage is less than 1%.
6, Q: Do you offer OEM?
A: Sure!
