Audited Supplier
Nylon
Engineering Plastic Sheet
＜0.01%
＜0.4%
30~40MPa
CHUNHUAN
Plastic Bag, Wooden Box
6mm - 400mm
China
3908101190
Product Description
MC Nylon PA6 Rod Factory Price per kg
DESCRIPTION
It has good tenacity,anti-earthquake capability.
It have the higher machine strength and good bearing heat,
The better anti- washest strength,the higher fusion point, the good property of molding process,the good property of absorb water,
The rate of the saturation is about 11%,and easy to fusion to sulfuric acid hydrexybenzene or the low temperature of frailty is below zero 20 degree - 30 degree.
CHARACTERISTICS
-Excellent wear resistance
-Good sliding properties
-High strength and toughness
-Self-lubricating
-Resistant to oil, weak acid and alkali
-Shock absorption
-Noise absorption
-Good electrical properties
MAIN PROPERTIES
| Item | Unit | Value | |
| PA | PA6(cast) | ||
| Density | g/cm3 | 1.05 ~ 1.15 | 1.18 |
| Elongation At Break | % | 40 ~ 75 | 50 ~ 70 |
| Tensile Strength | Mpa | 50 ~ 85 | 75 ~ 85 |
| Temperature Range | ºC | -40 ~ 100ºC | -40 ~ 90ºC |
| Dielectric Strength | KV/mm | 30 | 28 |
WHAT'S THE DIFFERENCE BETWEEN CAST NYLON AND EXTRUDED NYLON ?
The main difference is the manufacturing process. Cast nylon products are manufactured by a series of chemical reaction process. This allows products with extremely large dimensions and custom cast parts to be manufactured. Cast nylon owns better size stability and less water absorption. The crystallinity is greater so that wear resistance and machinability are better. Extruded absorbs more moisture and is thus tougher and has higher impact and vibration damping properties.
PICTURES OF OUR GOODS
WHY CHOOSE US ?
Our Service
1)Your inquiry will be replied within 2 hours during working time,Within 24hours when rest time.
2)Our working time is 7.30 AM --17:30 PM,Monday to Saturday.
3)General samples time can be arranged within 2--5days.
4)Orders will be produced exactly as request and approved samples.
5)When mass production,we send photos to show the production line.And confirm the estimate time again.
6)At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection.
7)Before shipment,our QC will have inspection to make sure the quality.
8)We always try best to ensure every order to delivery in time.
Payment Terms
1)T/T,Cash,L/C.
2)30% deposit,70% balance before shipment.
3)Lead time: 15 days after received deposited for 2tons.
4)Delivery way: By sea,By air, By EMS,DHL,UPS,TNT,FedEx.
Packing & Delivery
For sample: By EMS,DHL,UPS,TNT,FedEx
around 5--7 working days to arrive
For Bulk order:
1.Qty of 2tons,within 15 days.
2.Via Sea
3.Delivery time:we will finish production in 15days for 2tons.
4.For 20 GP,may nee around 30days.
INFORNATION ABOUT OUR COMPANY
Zhenjiang Chunhuan Sealing Material Co., Ltd was founded in 1985, our group has now emerged as one of the large-scaled backbone enterprises in the field of PTFE in China after 30-plus years of constant development.
Zhenjiang Chunhuan Sealing Material Co., Ltd is one of the fluoroplastics processing enterprises taking the lead in passing the IS09001 quality system certification. And with the strength of PTFE products, which are superior quality with FDA,REACH,RoHS,MSDS certificate.
Our group mainly manufactures products: PTFE rod, PTFE film, pipes, sheets & mats, PTFE push rods & extrude rods, PTFE turning plates & teflon film , PTFE fillings, PTFE belts, ropes, tapes & packing tapes, metallic gaskets, PTFE corrosion resistant linings, composited tubes & pipe fittings, rubber sheets, mats, framework oil seals & o-rings.
