Audited Supplier
10/100M
JINGKON
Carton
China
Product Description
Media Converter 10/100M
10/100M Media Converter
BC-10/100M adaptive Ethernet media converter can interconvert the electric signal of 100Base-TX twisted pair cable and optical signal of 100Base-TX. It extends the network transmission range from 100m to 100Km (single mode optical fiber). Its typical application is Ethernet long range interconnection, such as the interconnection between the equipment room of community with MAN. No configuration of the switch is needed during connection due to the adaptive function. The newly added lightning protection function guarantees the safety of the equipment. There are outside power supply, built-in power supply optional, AC220V, DC 48V optional.
Product feature:
Adaptive
BC-10/100M provides the adaptive function of 10/100M rate and full/half duplex, significantly protects the existing network investment during network upgrade.
Mass buffer
Unique buffer technology ensures the excellence of your network in data transmission and multimedia application; The buffer is 2M.
Performance:
Main features:
In conformity with the following
IEEE802.3 10Base-T standard
IEEE802.3U 100Base-TX/FX standard
IEEE802.3X standard
Interface transmission rate:
Optical interface: 100Mbps
Electrical interface: 10/100Mbps
Automatic identification with cross line and through line:
BC-10/100M can use either cross line or through line for connection with the devices such as switch or server.
TX LINK/ACT lamp "On" indicates the correct interconnected link.
Duplex supportive:
BC-10/100M supports full/half duplex adaptive, and 10/100M adaptive.
Network cable:
10/100Base-TX UTP 5
100Base-FX: Single mode fiber 8.3/125, 8.7/125, 9/125 or 10/125μm
Multi mode fiber 50/125, 62.5/125 or 100/140μm
Transmission range
10/100Base-TX: 100 m
100Base-FX: 2km (multimode)
25/40/60/100 km (single mode)
Optical interface feature:
Wavelength: 1310nm(25km, 40km, 2km)
1550nm(100km)
1310nm(multi-mode 2km)
LED display:
PWR: Power indicator lamp
FX LINK/ACT: Optical link connecting/ active status indicator lamp
TX LINK/ACT: Electrical link connecting/ active status indicator lamp
FX100: Optical interface rate indicator lamp
TX100: Electrical interface rate indicator lamp
FDX: Full/half duplex indicator lamp
Interface configuration:
One RJ45 10/100Base-TX interface
One SC/ST single/multi mode duplex connector
Power requirement:
Outside power supply: 5VDC 1A
Power consumption: <5W
Built-in power supply: 220VAC, -48VDC
Power consumption: <5W
Environmental requirement:
Operating temperature range: 0~60
Storage temperature range: -40~85
Relative humidity: 5%~90%
Dimensions:
Outside power supply: 26mm*71mm*94mm
Built-in power supply: 40mm*110mm*140mm
10/100M Media Converter
BC-10/100M adaptive Ethernet media converter can interconvert the electric signal of 100Base-TX twisted pair cable and optical signal of 100Base-TX. It extends the network transmission range from 100m to 100Km (single mode optical fiber). Its typical application is Ethernet long range interconnection, such as the interconnection between the equipment room of community with MAN. No configuration of the switch is needed during connection due to the adaptive function. The newly added lightning protection function guarantees the safety of the equipment. There are outside power supply, built-in power supply optional, AC220V, DC 48V optional.
Product feature:
Adaptive
BC-10/100M provides the adaptive function of 10/100M rate and full/half duplex, significantly protects the existing network investment during network upgrade.
Mass buffer
Unique buffer technology ensures the excellence of your network in data transmission and multimedia application; The buffer is 2M.
Performance:
Main features:
In conformity with the following
IEEE802.3 10Base-T standard
IEEE802.3U 100Base-TX/FX standard
IEEE802.3X standard
Interface transmission rate:
Optical interface: 100Mbps
Electrical interface: 10/100Mbps
Automatic identification with cross line and through line:
BC-10/100M can use either cross line or through line for connection with the devices such as switch or server.
TX LINK/ACT lamp "On" indicates the correct interconnected link.
Duplex supportive:
BC-10/100M supports full/half duplex adaptive, and 10/100M adaptive.
Network cable:
10/100Base-TX UTP 5
100Base-FX: Single mode fiber 8.3/125, 8.7/125, 9/125 or 10/125μm
Multi mode fiber 50/125, 62.5/125 or 100/140μm
Transmission range
10/100Base-TX: 100 m
100Base-FX: 2km (multimode)
25/40/60/100 km (single mode)
Optical interface feature:
Wavelength: 1310nm(25km, 40km, 2km)
1550nm(100km)
1310nm(multi-mode 2km)
LED display:
PWR: Power indicator lamp
FX LINK/ACT: Optical link connecting/ active status indicator lamp
TX LINK/ACT: Electrical link connecting/ active status indicator lamp
FX100: Optical interface rate indicator lamp
TX100: Electrical interface rate indicator lamp
FDX: Full/half duplex indicator lamp
Interface configuration:
One RJ45 10/100Base-TX interface
One SC/ST single/multi mode duplex connector
Power requirement:
Outside power supply: 5VDC 1A
Power consumption: <5W
Built-in power supply: 220VAC, -48VDC
Power consumption: <5W
Environmental requirement:
Operating temperature range: 0~60
Storage temperature range: -40~85
Relative humidity: 5%~90%
Dimensions:
Outside power supply: 26mm*71mm*94mm
Built-in power supply: 40mm*110mm*140mm
