Audited Supplier
SAT02
Operating Table
Operating Trolley
CE
Adult
Without LCD Display
Stainless Steel
Fixed Casters
Treatment Cart
1 Layer
Easy Cleaning
Blue
Non-Customized
New
Stretcher Trolley
Wooden Case Packing
Use for Patient Stretcher
110kg
1
none
Wooden Case Packing
203*70*65cm
Jiangsu, China
3005901000
Product Description
Hand-operated series of transfer trolleys, from first aid, resuscitation to centralised treatment, which can also be transferred, treated and sedated, are widely used in ICU, anaesthesia resuscitation and other departments.
(1) Specifications: overall length 1930mm, width 640mm, high and low lift
540-840mm, back lift 0-65°
Load capacity 200KG
(2) Back lift system: back lift is controlled by silent gas springs;
(3) Height adjustment rocker: metal rocker system, not easy to break
(4) Bed board: one-time blow-moulded high-strength PP bed surface;
(5) Frame: made of steel/partial aluminium;
(6) Guardrail plate: two-piece ABS lifting guardrail, which can also be fixed horizontally to increase the width of the bed and give the infuser's arm a comfortable place to rest; and has double safety locks for locking to prevent misuse and improve safety of operation;
(7) Angle display on the guardrail panels to make it easy to know the angle at which the back is raised during care; recesses in the middle of the guardrail panels on both sides to prevent the catheter from slipping off and to facilitate infusion drainage;
(8) Castors: central brake system with one foot brake and four wheels fixed at the same time;
Four 150mm diameter castors with caster control at all four corners of the trolley
(9) Independent central fifth wheel system: the trolley is fitted with control levers on both sides, the central fifth wheel is free to travel when retracted; when in use, it is "straight ahead", overcoming the inertial forces during transport, effectively controlling the direction of travel and making the transport process safer;
(10) There is a two-section tray under the bed, the tray is divided into two parts of different sizes and depths, which is easy to use, and the tray can carry 10Kg;
(11) Swing handle to control the lift of the trolley
(12) Equipped with 4 jacks for the collection of infusion rack, fixed collection of infusion rack
(13) Equipped with shelves for oxygen cylinders with a capacity of 500 litres (115-125mm diameter);
(14) Equipped with a transfer mattress: water-resistant fabric, easy to clean, with zips at the corners and washable external fabric; anti-static 3-stage construction, allowing parallel docking and transfer of patients with only one person.
(1) Specifications: overall length 1930mm, width 640mm, high and low lift
540-840mm, back lift 0-65°
Load capacity 200KG
(2) Back lift system: back lift is controlled by silent gas springs;
(3) Height adjustment rocker: metal rocker system, not easy to break
(4) Bed board: one-time blow-moulded high-strength PP bed surface;
(5) Frame: made of steel/partial aluminium;
(6) Guardrail plate: two-piece ABS lifting guardrail, which can also be fixed horizontally to increase the width of the bed and give the infuser's arm a comfortable place to rest; and has double safety locks for locking to prevent misuse and improve safety of operation;
(7) Angle display on the guardrail panels to make it easy to know the angle at which the back is raised during care; recesses in the middle of the guardrail panels on both sides to prevent the catheter from slipping off and to facilitate infusion drainage;
(8) Castors: central brake system with one foot brake and four wheels fixed at the same time;
Four 150mm diameter castors with caster control at all four corners of the trolley
(9) Independent central fifth wheel system: the trolley is fitted with control levers on both sides, the central fifth wheel is free to travel when retracted; when in use, it is "straight ahead", overcoming the inertial forces during transport, effectively controlling the direction of travel and making the transport process safer;
(10) There is a two-section tray under the bed, the tray is divided into two parts of different sizes and depths, which is easy to use, and the tray can carry 10Kg;
(11) Swing handle to control the lift of the trolley
(12) Equipped with 4 jacks for the collection of infusion rack, fixed collection of infusion rack
(13) Equipped with shelves for oxygen cylinders with a capacity of 500 litres (115-125mm diameter);
(14) Equipped with a transfer mattress: water-resistant fabric, easy to clean, with zips at the corners and washable external fabric; anti-static 3-stage construction, allowing parallel docking and transfer of patients with only one person.
