Audited Supplier
Medical-Hyperbaric-Oxygen-Chamber
The double steel chamber produced by our company is a special manned container. The chamber body is mainly made of pressure
resistant metal materials, the chamber body adopts modular design concept and light weight, the users can assemble and customize
the product size like building blocks.There equipped with touch screen, duplex intercom, emergency call, temperature and humidity
sensor, horn, etc.in chamber, and equipped with pressure sensor,oxygen concentration sensor, etc. outside the chamber.The whole
cabin is equipped with fully automatic integrated control cabinet,with simple control interface, simple operation process and
complete control functions.and equipped with medical oxygen generator, the personnel in cabin inhale high concentration oxygen
through mask oxygen inhalation equipment, which can effectively restore cell vitality, and improve the hypoxia state of the body,
quickly alleviate altitude reaction, help repair damaged cells and regulate the body's immunity.It has good effects on altitude hypoxia,
decline of sleep quality, decline of memory, dry skin and other conditions,which can be widely used in alleviating altitude reaction,
emergency rescue, physical recovery, memory improvement, rehabilitation physiotherapy, beauty care and so on.
Technical data
1. Max. Working pressure:0.06MPa
2. Gross weight: 2000kg
3. Envelop dimension: L2760*W1250*H2000mm
4. Seating capacity: two persons
5. Pressurized medium: air
6. Oxygen concentration in Cabin: ≤ 23%
7. Relative humidity: ≤ 80%
8. Pressurization time for the equipment: ≤ 10min
9. Power supply: 220V 50Hz
10. Working environment temperature: 0 ºC~ + 30 ºC
11. Noise in chamber: ≤ 65dB
12. Control mode:
Automatic control: PLC automatic control
| serial number | item | parameter |
| 1 | Inhaling oxygen method | Oxygen mask |
| 2 | Main material | Cabin is G345R, door for chamber is aluminum alloy and organic glass |
| 3 | Control system | PLC Controller, built-in control procedures. Touch screen to monitor the running parameters. |
| 4 | Pressure-adding | 1) The pressure is compressed air by |
| and | the air compressor through the air intake | |
| pressure-reducing | hole to the cabin. | |
| devices. | 2) The pressure is reduced by the | |
| normally open air discharge solenoid | ||
| valve. | ||
| 3) The pressure in the cabin can be | ||
| displayed by the control panel with a | ||
| mechanical pressure gauge installed in | ||
| the cabin. | ||
| 5 | Oxygen supply and exhaust system | 1) The oxygen generator supplies oxygen to the oxygen supply pipeline of |
| the oxygen mask in the cabin through | ||
| the oxygen inlet. | ||
| 2) The oxygen exhaust pipe of the | ||
| oxygen inhalation mask discharges | ||
| oxygen to the outside cabin. | ||
| 6 | Safety valve | Two safety valves |
| 7 | Telephone communication device | Equipped with telephone communication device, with communication function. |
| 8 | Emergency decompression valve | The cabin is equipped with emergency decompression valve, when need to quickly out of the cabin, can be in or out of the cabin via rapid pressure exhaust. |
