Audited Supplier
Chlorinated Rubber-top. mg. 1
Medium Grey
Liquid
Chlorinated Rubber
Spray
Primer
Air Drying
ISO9001, ISO9000
Steel
Aluminum Slurry / Anti-Rust Pigment
Non Conversion Type
Spray / Roller / Brush
Greater Than 3ºC
Minus20ºC - 50ºC
≤40μm
Barrier-Free Brushing
≤6h
White, ≤185g/Cm2
10mm
48h, No Abnormalities
45%
Below 35%
30μm
1 Year
Ayrood
Barrel
20KG
Jining, Shandong, China
Product Description
| Medium Gray Chlorinated Rubber Paint/Anti-rust Anticorrosive Paint/Water Resistance And Aging Resistance |
| Design Usage |
It is used to prevent corrosion of ships, port facilities, bridges, steel structures, chemical equipment, containers and cement buildings, so as to protect them from the erosion of the atmosphere, seawater and chemical gases and other media, so as to extend the service life of objects.
| Design Feature |
1. Anticorrosive and Antioxidant;
2. Acid and Alkali Resistance Salt Fog Resistance;
3. Strong Adhesion;
4. Good Supporting Facilities;
5. Quick Drying of Paint Film Curing at Room Temperature;
6. It has good low temperature construction performance and can be constructed in an environment of -20ºC-50ºC;
7. The permeability of water vapor and oxygen to the film is low, and it has excellent water resistance.
3. Strong Adhesion;
4. Good Supporting Facilities;
5. Quick Drying of Paint Film Curing at Room Temperature;
6. It has good low temperature construction performance and can be constructed in an environment of -20ºC-50ºC;
7. The permeability of water vapor and oxygen to the film is low, and it has excellent water resistance.
| Product Composition |
Chlorinated rubber resin + synthetic resin + pigment + filler + additive + solvent.
| Re-coating Interval |
| Temperature | 5ºC | 20ºC | 30ºC |
| Shortest re-coating interval | 24h | 8h | 6h |
| Longest re-coating interval | no limited | ||
| Decorate Method |
| Airless spraying | Thinner | Special thinner |
| Thinner Amount | 10-20% (Calculated by weight of paint) | |
| Nozzle Diameter | 0.4-0.5mm | |
| Ejection pressure | 14-15MPa (About 140-150kg/cm2) | |
| Air Spraying | Thinner | Special thinner |
| Thinner Amount | 20-30% (Calculated by weight of paint) | |
| Nozzle Diameter | 2.0-3.0mm | |
| Air pressure | 0.3-0.6MPa (About 3-6kg/cm2) | |
| Roller / Brush | Thinner | Special thinner |
| Thinner Amount | 10-20% (Calculated by weight of paint) | |
| Cleaning Agents | Special thinner |
Notice! ! !
1. Roller coating and high pressure airless spray paint must be fully stirred before use, so that the paint of the whole bucket is uniform, no precipitation, no color difference.
2. Chlorinated rubber paint cannot be mixed with conventional paint.
| Matching Paint |
| Front matching primer | Epoxy cloud iron intermediate paint |
| Epoxy resin primer | |
| Various chlorinated rubber primers | |
| Various chlorinated rubber intermediate paints |
Notice! ! !
The substrate temperature must be 3ºC above the dew point.
Surface treatment!!!
When there is a front paint, the front paint film must be dried completely, and the surface of the cured coating should be polished before coating and the oil and dust on the surface of the coating should be removed. No acid, alkali and moisture condensation on the paint film can be painted after the paint.
| Safety Matters |
1. Proper ventilation of the construction site;
2. Fireworks are strictly prohibited in the construction site and adjacent areas;
3. Use explosion-proof electrical equipment;
4. Metal impact is strictly prohibited;
5. Prevent static accumulation;
6. Wear necessary protective equipment;
7. Avoid inhaling paint mist, avoid skin contact with paint and thinner, etc;
8. If the eyes are accidentally splashed with paint, wash with plenty of water and seek medical attention;
9. Properly dispose of empty paint drums and remaining paint to avoid environmental pollution;
10. Take all other necessary safety and fire control measures according to the specific situation on the scene.
Sharing Photos |
