Audited Supplier
Feature :
Frequency heated bed ways.
Hardened and grounded gears in the head stock.
With 2 precision D degree taper roller bearings on the spindle.
Integrated deluxe cast iron floor stand.
Tolerance test certificate, test flow chart included.
Technical parameter :
| Specification | C6241 | C6246 |
| Swing over bed | 410mm | 460mm |
| Swing over cross slide | 220mm | 270mm |
| Swing in gap | 640mm | 690mm |
| Distance between centers | 1000/1500/2000/3000 mm | |
| Valid length of gap | 165mm | |
| Width of bed | 300mm | |
| Spindle nose | D1-6 | |
| Spindle bore | 58mm | |
| Taper of spindle bore | No.6 Morse | |
| Range of spindle speed | 12 changes, 25-2000r/min | |
| Max .travel of top slide | 128mm | |
| Max .travel of cross slide | 285mm | |
| Max.section of tool | 25x25mm | |
| Pitch thread of leadscrew | 6mm or 4T.P.I. | |
| Longitudinal feeds range | 42 kinds, 0.031-1.7mm/rev | |
| Cross feeds range | 42 kinds, 0.014-0.784mm/rev | |
| Metric threads range | 41 kinds, 0.1-14mm | |
| Inch threads range | 60 kinds, 2-112T.P.I. | |
| Diametrical pitches range | 50 kinds, 4-112DP | |
| Module pitches range | 34 kinds, 0.1-7MP | |
| Dia. of tailstock sleeve | 60mm | |
| Travel of tailstock sleeve | 128mm | |
| Taper of tailstock sleeve | No.4 Morse | |
| Power of main motor | 5.5kW(7.5HP) 3PH | |
| Power of coolant pump | 0.1kW(1/8HP) 3PH | |
Standard accessories:
Four Jaw Chuck and Adapter
Face Plates
Steady Rest
Follow Rest
Oil Gun
Thread Chasing Dial
Reduction Sleeve
Dead centers
Work lamp
Coolant system
Foot brake
Operate tools
Operation Manual
Taper turning attachment
Lead Screw Cover
Tool post cover
Chuck cover
Quick change tool post
Live center
DRO
Q: Are you a trading company or a physical factory?
A: We are a specialized physical factory for more than 10 years. Our machines also gained CE certificate, ISO9001 and EAC certificate.
Q: What's your main products of your company?
A : We specialized in Vertical Machining Center, CNC Lathe, Milling Machines, Lathes, Drilling Machines, Saws, Shapers and so on.
Q: Can you provide customized machine?
A: Yes, we provide customized service for customers to meet different requirements.
Q: Can we visit your factory?
A: Sure, we warmly welcome you to visit our factory at any time. The more you know about us, the more you will trust us! So you can rest assured on our quality machines and our best service.
Q: What's the Payment Terms ?
A : T/T ,30% deposit when order ,70% balance payment before shipment ; Irrevocable LC at sight.
Q: What is your trade terms?
A: FOB, CIF ,DDP and CFR all acceptable.
