Audited Supplier
SMU-30A
Technical Support
3 Years
Flotation Machine
Biological Treatment
Industrial, Agriculture, Hospital
SHUIYI or Customized
Woonden Cses
864mm*2220mm*96mm
Made in China
Product Description
About Shuiyi:
After years of honed in the competition, SHUIYI has become one of the few manufacturers in the industry with a full range of membrane technologies and products including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO).
Our membrane products are widely used in the application fields of municipal sewage reclamation, industrial wastewater zero discharge, reclaimed water reuse, pure water preparation, highly polluting wastewater treatment, river restoration, decentralized rural sewage treatment, process concentration, and separation, etc., with rich application experience and engineering project cases.
Introduction
SHUIYI latest Slufri® series MBR membrane products adopt lining reinforced PVDF hollow fiber membrane of new formulas and new processes. The operating flux, anti-fouling ability, and service life have reached the international leading level. It can realize low-cost and high-reliability treatment in many applications such as reclaimed water reuse and various industrial wastewater treatment.
Features
Specifications
PS. The design flux and backwash flux depend on the operation and maintenance of the entire system
Application:
Municipal water supply
Industrial water purification
Municipal wastewater treatment
Industrial wastewater treatment
Landfill leachate advanced treatment
Reclaimed water reuse
Pretreatment of RO system
After years of honed in the competition, SHUIYI has become one of the few manufacturers in the industry with a full range of membrane technologies and products including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO).
Our membrane products are widely used in the application fields of municipal sewage reclamation, industrial wastewater zero discharge, reclaimed water reuse, pure water preparation, highly polluting wastewater treatment, river restoration, decentralized rural sewage treatment, process concentration, and separation, etc., with rich application experience and engineering project cases.
Introduction
SHUIYI latest Slufri® series MBR membrane products adopt lining reinforced PVDF hollow fiber membrane of new formulas and new processes. The operating flux, anti-fouling ability, and service life have reached the international leading level. It can realize low-cost and high-reliability treatment in many applications such as reclaimed water reuse and various industrial wastewater treatment.
Features
- Lower energy consumption and higher efficiency;
- Higher mechanical strength, slower flux decline, longer service life;
- Standardized modularization design for easy installment and replacement;
- Stable and reliable water production;
- Slower contamination speed, longer clean cycle.
Specifications
| Membrane Specifications | Model | SMU-30E | SMU-18E | SMU-18M | SMU-30A |
| Material | Support layer: PET Separate layer: PVDF | ||||
| Active Membrane Area | 30 m2 | 18 m2 | 18 m2 | 30 m2 | |
| Nominal Pore Size | 0.1 μm | ||||
| Hollow Fiber Inner/Outer Diameter | 2.05/2.6 mm | ||||
| Filter Type | Reinforced outside-in membrane | ||||
| Membrane Module Specifications | Model Dimensions | 1250×2000×30 mm | 1250×1300×30 mm | 572×1560×46 mm | 824×2200×46 mm |
| Outlet Connection Size | Ф24 | Ф24 | Ф27 | DN32 | |
| Material | End | ABS | |||
| Sealing Material | Epoxy resin/Polyurethane | ||||
| Center Pole | SUS304 | ||||
| Weight | Membrane Weight (Dry) | 15 kg | 12 kg | 6 kg | 12 kg |
| Membrane Weight (Wet) | 30 kg | 20 kg | 9 kg | 25 kg | |
| Operation Conditions | Temperature | 5~40ºC | |||
| SDI15 | 5000-10000 mg/L | ||||
| pH | 2-10 | ||||
| Operating Flux (LMH) | 10-30 | ||||
| Backwash Flux (LMH) | 30-50 | ||||
| Recommended Transmembrane Pressure (TMP) | 0-35 kPa | ||||
| Maximum Backwash Pressure | 70 kPa | ||||
| Aeration Intensity | 60-120 Nm3/h·m2 shadow area | ||||
| Chemical Cleaning pH Range | 1-11 | ||||
| Quality of Permeate Water | Turbidity | ≤ 0.5 NTU | |||
| SS | ≤ 2 mg/L | ||||
Application:
Municipal water supply
Industrial water purification
Municipal wastewater treatment
Industrial wastewater treatment
Landfill leachate advanced treatment
Reclaimed water reuse
Pretreatment of RO system
