Audited Supplier
Aluminum cut shot, made from superior quality aluminum wire, is an ideal media for cleaning and reinforcing the surface of nonferrous metal casting parts. It's mainly applied for the surface treatment of Aluminum, Zinc products or work pieces with thin wall.
Application | Features |
Blast cleaning : Use for blast cleaning of steel board. H type steel, steel pipe and all kinds of steel material, casting, die-casting, gorging, glass surface for industries of steel structure, construction, bridge, shipbuilding, pipes, container, locomotive, engineering machinery, automobile, casting, forging, glass, comodity. Shot peening : Used for shot peening of spring, shaft, gear, connecting bar, blade, chain, crank, wheel spares for industries of automobile, locomotive, ship, plain, machine. | Specific gravity greater than other sand blasting beads. Hardness is lower than steel ball and glass beads. Applies to fear high impact but low sand material hardness of the sand blasting operations. |
PRODUCT PARAMETER
Grade | as cut, conditioned |
Chemical Composition | AL≥99% |
Microhardness | 40-60 HV/95-125 HV |
Tensile Intensity | 80-240 Mpa |
Durability | long life time/longer durability |
Microstructure | Deformed α |
Density | 2.7g/cm3 |
Equivalent Shot Sizes | ||
Cut-wire Size (Inches) | Cut-wire Shot Size(mm) | Cast steel Shot Size |
0.012 | 0.30 | S-70 |
0.017/0.018 | 0.40/0.45 | S-110 |
0.020/0.023 | 0.50/0.60 | S-170 |
0.028 | 0.70 | S-230 |
0.032/0.035 | 0.80/0.90 | S-280 |
0.035/0.041 | 0.90/1.00 | S-330 |
0.041/0.047 | 1.00/1.20 | S-390 |
0.054 | 1.40 | S-460 |
0.062 | 1.60 | S-550 |
0.080 | 2.00 | S-660 |
0.090 | 2.30 | S-780 |
0.126 | 3.20 | S-1110 |
Type | Si | Cu | Mn | Mg | Ai |
1070 | 0.2 | 0.04 | 0.03 | 0.03 | 99.7% |
5056 | 0.3 | 0.1 | 0.05-0.2 | 4.5-5.6 | remainder |
DX BLAST Co., Ltd. (JX Blasting), with 30 years development, is a professional manufacturer of shot blasting machines and shot peening machines.
DX BLAST, distribution network consists of sales agents from many countries as Poland. Mexico. UAE. Saudi Arabia. Malaysia, Vietnam. Philippines, Pakistan, Indonesia.
FAQ
A:According to work-piece size & material and productivity
Q:What kind of abrasive for shot blasting machine ?
A: steel shot, steel grit , cut wire shot, stainless steel shot, etc.
Q:Quality warranty?
A:1 year and please find our agent in your local ,they would supply long-term after-sales service .
Q:Is foundation pit essential?
A:Up to machine size and workshop
Q:How many workers to operate the machine?
A:1 Operator
Q:Install assistance?
A: Installation tool and experience workers for operation training
Q:After sale service?
A:Full stock for spare parts, regular after sale service by local agent.
