Audited Supplier
FBME Series
in Warranty
1 Year
10-30m
200-300 L/min
Motor
Cast Iron
Single-stage Pump
Booster Pump
Electric
Electric Pump
Blade Pump
Submersible Pump, Slurry Pump
Sewage Pumps
Wear Pump
Vortex Pump
MEUDY
Carton
GS, CE, EMC, ISO9001
China
8413709190
Product Description
FBME series is a portable automatic submersible drainage pump. FBME series pump is automatically started and stopped by the built-in intelligent controller and water level electrode. The starting water level accuracy reaches to millimeter level. Delayed shutdown at low water level will prevent frequent startup due to water level fluctuation. In case of abnormal voltage and overload, FMBE pump will stop automatically and start automatically for detection. It is suitable for use in places with unstable water level and voltage, and can be operated unattended.FBME pump adopts lightweight design. The small outer diameter allows it to be used in an 8-inch well. The components of FBME series are made of wear-resistant rubber and ductile iron, which has excellent durability. The water is sucked from the bottom and discharged from the top through the interlayer between the motor case and the water jacket to provide the highest cooling efficiency for the motor, allowing continuous operation at low water level. There's a large gap between the semi open impeller and the pump body, so the impeller will not be easily stuck by mud or sand. The hose coupling could be installed vertically or obliquely to prevent the discharge hose from folding or bending.
Built-in intelligent controller function
when the water level is lower than the liquid level probe, the pump stops working within 60 seconds. When the water level rises to contact with the liquid level probe, the pump starts working again, and the height of the liquid level probe can be adjusted freely.
when the voltage is abnormal or overloaded, the pump will automatically stop working and recover after 5 minutes; When the impeller is stuck and locked, the pump will stop immediately and recover through power failure and repower transmission.
when the motor is over temperature, the pump will stop working automatically, and the electric pump will start automatically after the motor is cooled.
with the display panel, you can query the cumulative operation time of the pump and the latest 5 fault records.
